Honda EP3 Fitted With Cobra Imola Bucket Seats
Customer cars, December 2023
We came across a useful video on YouTube from the Accelerate channel, showing a Cobra Imola fixed back bucket seat going into their naturally aspirated Honda Civic EP3. It walks through how the seat went in, how it fits the car and what changed after the factory Type R seats came out.
The headline is weight. In the video the Type R seats come in at around 25kg and 27kg, against roughly 11kg for the Cobra, a big saving on each side of the car.
- A Cobra Imola bucket seat fitted to a Honda Civic EP3 on the Accelerate YouTube channel
- Fitted on a sliding runner and side mount combination
- Around 25 to 27kg per factory Type R seat against about 11kg for the Imola
- The Imola Pro-Fit is approved to FIA 8855-1999 and HANS friendly
- A Road and Track Imola is the same shell without the FIA approval
- Direct fit EP3 frames from M2 are on our site too

What is on this page
The Accelerate EP3 video
The video follows the whole job, from taking out the factory seats to sitting in the Imola once it is bolted in. It is a good look at what a fixed back bucket seat changes in an EP3: the driving position, the support and the weight.
How the Imola is fitted
The set up in the video is a sliding runner and side mount combination, which works with most narrow bucket seats. A fixed back Cobra bucket seat needs Cobra side mounts. Other brands of mount cannot be guaranteed to fit correctly.
If you want fore and aft adjustment, the Cobra sliding runner gives 200mm of travel. It comes with a 291mm or a 405mm wide handle, so check the width against your seat and mounts before ordering, or send us the details and we will confirm the kit.

-
From £59.00 Incl. VATFrom £49.17 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The Cobra Imola range
Cobra are a UK seat maker, and the Imola is one of their most popular bucket seats. The Imola Pro-Fit is a one piece fibreglass seat approved to FIA 8855-1999, trimmed in spacer fabric, HANS friendly and sized for a 28 to 32 inch waist. Its 475mm base is the narrowest of Cobra’s side mount competition shells, which helps in a tight footwell.
For track days and road use, the Imola Track is the same shell without the FIA homologation, at a lower price. There is a GT version of each too. Garreth’s advice is to buy the FIA version if the car might ever be scrutineered.
-
From £624.00 Incl. VATFrom £520.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £663.60 Incl. VATFrom £553.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £485.82 Incl. VATFrom £404.85 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £534.60 Incl. VATFrom £445.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Frames for the Civic EP3
If you want a full base frame for the EP3, there are direct fit frames on our website that bolt to the factory mounting points in the floor, with no drilling. The M2 Motorsport EP3 and EP2 frame can be set up for a side mount or base mount seat, and it is listed singly or as a pair. Sparco also make a frame for the 2001 to 2005 Civic Type R.
Civic chassis codes from these years are easy to mix up, so send us the registration and we will confirm the right frame for your car.
-
From £166.20 Incl. VATFrom £138.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £86.68 Incl. VATFrom £72.23 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
How much weight does a Cobra Imola save in an EP3?
In the Accelerate video the Type R seats weigh around 25kg and 27kg, against about 11kg for the Imola.
Is the Cobra Imola Pro-Fit FIA approved?
Yes. It is approved to FIA 8855-1999.
What mounts does a Cobra Imola need?
Cobra side mounts, as other brands of mount cannot be guaranteed to fit correctly.
Is there a direct fit frame for the Civic EP3?
Yes. The M2 Motorsport EP3 and EP2 frame bolts to the factory floor points with no drilling.
💬
Seen on YouTubeAn Imola in an EP3
A lighter, lower seat for the Civic Type R, on Cobra mounts and runners.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.


