Volvo 240 Fitted With Sparco R100 Seats
Customer cars, August 2023
Our customer's Volvo 240 has a new interior. We supplied a pair of Sparco R100 Vinyl reclining seats and the Planted Technology seat brackets made for the 240, and the result suits the car very well.
The seats sit comfortably in the cabin with room to spare between each seat and its door. Here is how they went in, and what to think about if you are planning the same for your own 240.
- Car: our customer's Volvo 240
- Seats: a pair of Sparco R100 Vinyl reclining seats in black
- Brackets: Planted Technology frames made for the Volvo 240
- Sliding runners fitted between seat and bracket for fore and aft adjustment
- R100 base fixings: 271mm x 345mm
- The R100 takes up to a 4 point harness

What is on this page
The Volvo 240 and its new seats
The pair of black Sparco R100 Vinyl reclining seats fit well inside the 240, with plenty of room between the seats and the doors. The R100 is a slim seat with narrow shoulder supports, which is why it works in the Volvo and in many smaller cars with tighter cabins.
The vinyl trim was a sensible choice too. It wipes clean, so the seats will keep looking tidy in a car that gets used. Vinyl is also a good pick for open-top cars, where cloth would soak up the weather.
How the seats are mounted
The R100 is a base mounted seat. Each seat bolts to a pair of sliding runners, and the runners bolt to a Planted Technology bracket. The seat base fixings measure 271mm x 345mm.
Planted brackets are made for one car. The ones in this car are built for the Volvo 240 and pick up the floor bolt pattern Volvo used, so no cutting or drilling is needed. The runners give the driver fore and aft adjustment, just like the factory seats.

Garreth’s advice for any older car is to lift the carpet and check the floor around the mounting points before the bracket goes in. A bracket is only as strong as the metal it bolts to.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £97.20 Incl. VATFrom £81.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £312.00 Incl. VATFrom £260.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Sparco R100 range
The R100 Vinyl is the same seat as the cloth R100 with a different cover. The steel frame, the recline mechanism and the base bolt pattern are shared, so the fitting parts are the same whichever trim you choose. We had the R100 Vinyl in standard black on display in the showroom this summer, ready to sit in and try.
The same R100 shape is also used for Sparco’s office and gaming chairs, including the Sparco Icon, which puts the seat on an office base with armrests.
Harnesses with a reclining seat
The R100 has two harness slots in the backrest, so it will take a harness as well as the standard seat belt. We recommend nothing more than a 4 point harness in a reclining seat: there are not enough slots to run a 6 point harness safely. Our guide to 4 point and 6 point harnesses explains the difference.
What seats were fitted to the Volvo 240?
A pair of Sparco R100 Vinyl reclining seats in black.
What brackets were used?
Planted Technology brackets made for the Volvo 240, with sliding runners between each seat and its bracket.
What is the Sparco R100 base bolt pattern?
The R100 base fixings measure 271mm x 345mm.
Can I use a harness with a Sparco R100?
Yes, up to a 4 point harness. Reclining seats do not have enough slots for a 6 point harness.
💬
Why it worksA slim seat for a classic
The R100 Vinyl on car specific Planted brackets suits the 240 without cutting a thing.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



