Cobra Monaco 2022 Vinyl Bucket Seat Now In-Store
In store, April 2023
The Cobra Monaco 2022 Vinyl Edition FIA bucket seat is now on display in our showroom, where you can come and see it and sit in it. It is a version of the Cobra Monaco Pro, trimmed all over in vinyl where the standard Monaco Pro uses 3D spacer fabric.
The stitching design is a little different too, with the Cobra Motorsport branding in white and red on the head support. We have two here, and because they are in stock they are ready to go out straight away or be collected.
- Cobra Monaco 2022 Vinyl Edition, on display in the showroom
- Full vinyl trim in place of the Monaco Pro's 3D spacer fabric
- White and red Cobra Motorsport branding on the head support
- FIA 8855-1999 approved, steel framed with a solid back and base
- Base or side mounted, with slots for a 4 or 6 point harness
- A pair in stock, also listed together as a pair

What is on this page
The Vinyl Edition
Under the trim this is the same seat as the Monaco Pro: a steel framed, fixed back bucket, FIA 8855-1999 approved, with an integral head pad and shoulder support. The difference is the covering. Vinyl wipes clean and does not hold on to damp, which suits cars that see muddy boots or wet overalls, while the spacer fabric of the standard seat breathes better in a hot cabin.
We have made a separate listing for the two we have on display, so you can buy them as a pair for immediate dispatch or collection.
-
£660.00Original price was: £660.00.£575.40Current price is: £575.40. Incl. VAT£550.00Original price was: £550.00.£479.50Current price is: £479.50. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceAdd to basket -
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £264.00 Incl. VATFrom £220.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The Monaco range: Pro and Sport
The Monaco Pro seats carry FIA approval, so they can be used across motorsport where an approved seat is required. The Pro is fully steel plated, with a solid back and base for intrusion protection, a side mount facility and body cooling spacer fabric on the standard trim.
The Monaco Sport seats do not have FIA approval, so they are for track days and fast road use, not competition. They give the same support as the FIA versions, holding you in place through fast corners, and the Sport range comes in three sizes, so it fits a wider range of drivers.

Fitting a Cobra Monaco
Because the Monaco is a steel framed, fixed back seat, it can be base mounted or side mounted: on side mounts, on sliding runners, or directly to a frame. The Monaco Pro has a 291 bolt pattern and works with Cobra frames and side mounts. It is a narrow seat, which is why it goes into tight cockpits such as the Mazda MX-5 and Honda S2000.
Once the seat is in, the harness is next. Garreth’s advice is to tell us the car, your height and your waist size, and we will match the seat, frame and harness together. Our guide to base mounts and side mounts explains the options, and our harness fitting guide covers the belts.
What is different about the Cobra Monaco 2022 Vinyl Edition?
It is trimmed all over in vinyl, not the 3D spacer fabric of the standard Monaco Pro, with white and red branding on the head support.
Is the Cobra Monaco Vinyl Edition FIA approved?
Yes. It is approved to FIA 8855-1999.
Is the Cobra Monaco Sport FIA approved?
No. The Monaco Sport is a track day and fast road seat.
Can the Cobra Monaco be side mounted?
Yes. It can be base mounted or side mounted, on side mounts, sliding runners or directly to a frame.
💬
Why we like itThe Pro in vinyl
The same FIA approved steel Monaco, in a trim that wipes clean.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




