An OMP direct fit subframe for the Peugeot 206. Part number HC795.
The 206 GTi 180 and the RC are the versions people build, and there is proper rally pedigree behind the shape: the 206 WRC won two manufacturers’ championships.
Send us the registration
The 206 ran for a long time in a lot of specifications, and there was a 206 CC and a 206 SW alongside the hatch. Two minutes confirming which you have saves ordering the wrong frame.
Weight and space
Light and not large inside, so shell width matters as much as the frame does and a heavy steel seat gives back a real slice of what makes it quick. Ask us about the lighter options and tell us your height.
Check the floor first
Twenty odd years old and cheap when new. Lift the carpet and look at the metal round the mounting points before you spend anything.
What else you need
Side mounts and the seat. Two bolt patterns, not one. Sparco, OMP and Corbeau base mount seats share the 345mm by 271mm spacing and bolt straight on. Recaro use 405mm by 290mm and the frame carries that as well. Cobra sit on their own 291mm by 330mm pattern, so those need multi hole side mounts.
Order twice for a pair. Tell us about side airbags in the factory seats before anything comes out.
Have you written anything useful for my car?
Yes: Customer Question: What Are the Top 3 Reclining Sport Seats for My Peugeot 206?, and Customer Car: Upgrading Your Peugeot 206 With Sparco R100 Seats Has Never Been Easier.. Those are written around the same car, from real fittings and customer questions, so they are worth a look before you decide.
Will this fit my car?
This frame is made for the Peugeot 206. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
It takes seats drilled 345mm x 271mm (the Sparco and OMP seat pattern) and 405mm x 290mm (the Recaro seat pattern). If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on OMP frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a base-mount frame: the seat bolts down through its base, the simpler stack that suits seats with a flat bottom and keeps the install low-fuss. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
