Recaro Pole Position Carbon Bucket Seats
Recaro seat guide
The Recaro Pole Position is one of the most familiar fixed back bucket seats there is. It gives proper side support in a shape that still works in a road car, which is why it turns up in everything from weekend track cars to fast road builds.
The Pole Position Carbon is the lightest version of that shell. This guide explains what the Carbon is, how it differs from the glass fibre ABE and the FIA Pole Position, who it suits, and what you need to fit one.
- Shell: carbon aramid composite, around 4.5kg
- Approval: German ABE road approval, not FIA
- Suits drivers under 6ft with a 32 to 36 inch waist
- Trims: Perlon velour black or leather black
- Side mount seat: mounts and frames are sold separately

What is on this page
What the Pole Position Carbon is
The Pole Position Carbon uses the same shape as the standard Pole Position, but the shell is made from a carbon aramid composite in place of glass fibre. That brings the weight down to around 4.5kg, roughly 2.5kg lighter than the glass fibre Pole Position FIA.
It is a one piece, fixed back shell with an integrated headrest and shaped shoulder cut outs that hold the upper body in corners. It comes in two trims, black Perlon velour or black leather, and the exposed carbon on the back is a large part of the appeal.
Up close, the carbon weave runs across the whole back of the shell, finished in a gloss that looks good in a stripped cabin or behind a leather interior alike.
The harness slots at the top of the back are trimmed in black, and the cover wraps over the front edges of the shell, so from the front it looks like any other Pole Position until you walk behind it.

ABE road approval, not FIA
This is the part that matters most when choosing. The Carbon carries ABE approval, a German road use certificate that allows the seat to be fitted to many cars with a standard three point belt, subject to confirmation for the specific vehicle. It is not a motorsport approval, and it does not make the seat legal for FIA or Motorsport UK timed competition.
The seat’s belt slots accept a four point harness for private track day use, but only the three point belt is covered by the road approval. If the car is going to compete, the Pole Position FIA is the seat to look at: it is approved to FIA 8855-1999, uses a glass fibre shell weighing around 7kg, and takes a 6 point harness through its five slots.
Carbon, glass fibre ABE or FIA
| Version | Shell | Approval | Best for |
|---|---|---|---|
| Pole Position Carbon | Carbon aramid, around 4.5kg | ABE road | The lightest road and track day shell |
| Pole Position ABE | Glass fibre, around 7kg | ABE road | Road and track days, more trim choices |
| Pole Position FIA | Glass fibre, 7.0kg | FIA 8855-1999 | Timed competition |
The glass fibre ABE shares the same road approval and gives the same hold at a lower price. It comes in more trims, including Ambla leather with Dinamica suede, full leather, Nardo with Artista, and Perlon velour, and it has a lumbar support pad. The Carbon is for drivers who want the lightest Pole Position and the look of the exposed shell.
All three are sized for drivers under 6ft with a 32 to 36 inch waist. Garreth’s advice is to sit in one before you buy if you can, because the fit across the hips and shoulders is what decides it. Taller drivers should ask us about the Profi SPG, which has more shoulder height.
-
From £2,816.10 Incl. VATFrom £2,346.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,039.50 Incl. VATFrom £866.25 Excl. VATPayPal CreditTop 10 productKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £995.40 Incl. VATFrom £829.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Fitting a Pole Position Carbon
The Pole Position is a side mount only seat. It bolts to a pair of side mounts, and those mounts bolt to a subframe or runner kit for the car. The seat is sold on its own, so the mounts and frame are separate items.
Recaro’s own steel side mounts are made for the Pole Position ABE and FIA and the Pro Racer SPG XL, and Recaro’s alloy side mounts also fit the Pole Position. Below the mounts you need a frame or runners that suit both the seat and the car. Our guide to seat bolt patterns explains why side mount seats are the easiest to fit across brands, and our write up on fitting Pole Positions to a Porsche Boxster 987 shows a full fitting kit in practice.
Check the room in your car before ordering. The tall back and shoulder wings can be tight in small cabins, and the height of the frame decides where your head sits against the roof.
Is the Recaro Pole Position Carbon FIA approved?
No. It has German ABE road approval, which is not valid for FIA or Motorsport UK competition.
How much does the Pole Position Carbon weigh?
Around 4.5kg, roughly 2.5kg lighter than the glass fibre Pole Position FIA.
Can I use a harness with the Pole Position Carbon?
The belt slots take a four point harness for private track use, but the road approval covers a standard three point belt.
What do I need to fit a Pole Position Carbon?
A pair of side mounts that suit the Pole Position, plus a subframe or runners for your car.
Who does the Pole Position suit?
Drivers under 6ft with a 32 to 36 inch waist.
💬
Our viewThe lightest Pole Position for the road
Pick the Carbon for weight and looks, the ABE for value, and the FIA if the car competes.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




