Chevrolet Planted Technology Bucket Seat Brackets Are Now Available
Fitting brackets, January 2021
Planted Technology seat brackets are now available for a wide range of Chevrolet models. A Planted bracket bolts to the car's own seat mounting points and gives you a flat, slotted steel base for a bucket seat, with or without runners.
The Chevrolet range is a long one, from classics such as the Chevelle, Nova and C3 Corvette to the Camaro, the C6 and C7 Corvette and everyday cars such as the Cruze and Sonic.
- New in January 2021: Planted Technology seat brackets for Chevrolet
- Covers the Camaro, Caprice, Cavalier, Chevelle, Cobalt, Colorado, Corvette, Cruze, HHR, Malibu, Monte Carlo, Nova, S-10, Sonic and TrailBlazer SS
- Planted brackets are car specific steel and use the factory seat mounting points
- Slotted for runners from most major seat brands
- Some Corvette brackets depend on seat belt tab layout, so check before ordering

What is on this page
What a Planted bracket does
When the factory seat comes out, a bucket seat needs something to bolt to that fits the car. A Planted Technology bracket is made for a specific model, so it uses the factory seat mounting holes and the floor does not need cutting or drilling.
The top is flat and slotted to suit runners from most of the major seat makers, including Cobra, Corbeau, OMP, Recaro, Sabelt and Sparco, which is why we can recommend Planted with so many of the seats we sell. A few combinations need extra holes drilling in the bracket, and Planted leave room for that.
Planted make the brackets in the USA from 3/16 inch steel, finished in black, and many carry a seat belt tab. They are made per side, so a pair of seats needs two brackets.
A bucket seat bolts on with side mounts, and runners can go between the bracket and the side mounts so the seat slides. Planted say runners add about 3/4 of an inch of height, so fixing the seat straight to the bracket sits it lowest.

The Chevrolet range
The models covered include the Camaro, Caprice, Cavalier, Chevelle, Cobalt, Colorado, Corvette, Cruze, HHR, Malibu, Monte Carlo, Nova, S-10, Sonic and the TrailBlazer SS, with several generations of most of them.
The Corvette shows why the detail matters. For the C6 and C7 there are two brackets, depending on whether the car has the seat belt tab on the inboard side only or on both sides. Planted also warn that the C3 bracket may not fit every C3, as the car changed a lot over its long run. The Camaro splits by generation too, with the ZL1 taking its own part.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check before you order
Planted design on left hand drive cars, which is how many American imports arrive here anyway. On right hand drive cars with the same floor the sides swap, so we list them by UK driver and passenger side.
Garreth’s advice on anything American, and especially the Corvettes, is to lift the carpet, photograph what is under the seat on both sides and send it to us. We will check it against the bracket before you order. Our later post on Planted Chevrolet brackets goes into more of the range.
Which Chevrolet models did Planted brackets cover?
The Camaro, Caprice, Cavalier, Chevelle, Cobalt, Colorado, Corvette, Cruze, HHR, Malibu, Monte Carlo, Nova, S-10, Sonic and TrailBlazer SS.
Is there one bracket for the C6 and C7 Corvette?
There are two, depending on whether the seat belt tab is on the inboard side only or on both sides.
Will the C3 Corvette bracket fit my car?
Planted say it may not fit every C3, so send us photos of the floor before ordering.
Do Planted brackets need the floor drilling?
No. They bolt to the factory seat mounting points.
💬
New for ChevroletPlanted Technology brackets
Model specific steel brackets, from the Chevelle to the C7 Corvette.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.

![Planted Technology Chevrolet Corvette [C6/C7 Chassis Excluding ZR1] (2005-2019) - Driver / Left *Seat belt tab on inboard and outboard sides Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB250DR-1-300x300.jpg)
![Planted Technology Chevrolet Corvette [C3 Chassis] (1968-1982) - Driver / Left *May not fit all C3 Chassis, see online diagram Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB267DR-1-300x300.jpg)
![Planted Technology Chevrolet Camaro [6th Generation] (2016+) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB284DR-1-300x300.jpg)
![Planted Technology Chevrolet Cruze [1st Generation / J300 Chassis] (2008-2016) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB299DR-1-300x300.jpg)