Sparco Ultra Carbon: our February 2025 showroom photographs
In February 2025, a customer order brought these Sparco Ultra Carbon seats through our showroom. We unpacked them for a check before dispatch and took the photographs shown here. The bare shells make the carbon weave, harness openings and red Ultra badges easy to see.
- Ultra Carbon manufacturer reference: 008037ZNR
- FIA 8855-1999 competition seat
- Bare carbon fibre shell, with optional padding
- Side mounting, with supports and vehicle fittings specified separately

What is on this page
What came through the door
The seats photographed here had no stitched cover or upholstery over the shell.
The Sparco logo sits above the two shoulder openings, with the red Carbon Tech Ultra badge below them. The close-up shows the moulded Sparco trims around those openings.
Sparco's 2025 catalogue describes a double carbon fibre shell designed for use without padding. It lists the Ultra Carbon as FIA 8855-1999, size S-M, with an indicative weight of 4.5kg. The manufacturer explains that catalogue weights are averages from samples and can vary.
The exact-part Sparco Japan reference also identifies 008037ZNR as the black carbon fibre model with FIA 8855-1999 homologation.

Carbon or fibreglass?
The Ultra Carbon and fibreglass Ultra are both bare-shell, fixed-back competition seats with side mounting. Sparco’s 2025 catalogue gives both the S-M designation and FIA 8855-1999 approval. Neither has lateral head-support wings.
The catalogue’s 4.5kg carbon and 6.2kg fibreglass figures differ by 1.7kg; use that as a dated manufacturer comparison, with the actual supplied version checked separately.
| Detail | Ultra Carbon | Ultra fibreglass |
|---|---|---|
| Manufacturer reference | 008037ZNR | 008037FNR |
| Shell | Double carbon fibre shell | Double glass fibre shell |
| Homologation | FIA 8855-1999 | FIA 8855-1999 |
| Catalogue size | S-M | S-M |
| 2025 indicative weight | 4.5kg | 6.2kg |
| Mounting | Side mount | Side mount |
Sizing and fitting
Start with the driver and the space in the car. The 2025 catalogue describes both Ultra shells as S-M and intended for narrow cockpits. Its Ultra Carbon drawing shows a 440mm overall shoulder span and 850mm height. Those exterior dimensions do not establish the driver’s internal hip clearance.
For a current purchase, ask us for the drawing and instructions for the actual supplied revision before ordering. Check the shell at the shoulder and base, the available mounting height and the driver’s harness routing. Tell Garreth which seat you already use and where it feels tight; Cameron can then help check the measurements and fitting arrangement.
The live seat listings are seat-only. The side supports, vehicle-specific frame and fixings must suit the particular seat and car. Use the supplied instructions to identify the compatible combination.
Our Ultra padding listing offers base/headrest pads or a complete kit, in Standard material or Alcantara. Identify the seat and kit references together before choosing the pads. Sparco’s 2025 catalogue describes repositionable pads attached with Velcro, including full and headrest/cushion kits.
-
From £75.60 Incl. VATFrom £63.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Choosing between carbon and fibreglass
A carbon shell can be worth considering when its verified weight saving matters to the build. Fit comes first: a lighter model is only useful if the driver, mounting arrangement and available cockpit space work together. Compare the total seat-and-fitting cost using the current product pages.
Also shown below is the ADV-SCX, a different Sparco carbon seat with head support, for readers comparing other designs.
Our April 2024 Ultra fibreglass feature records that model’s earlier launch. You can also browse the Sparco FIA seat range.
Ultra Carbon questions
Which seat is shown in these photographs?
The bare Sparco Ultra Carbon, manufacturer reference 008037ZNR, photographed in our showroom in February 2025.
What approval does the Ultra Carbon have?
Sparco identifies the model as FIA 8855-1999; check the actual seat label and the requirements of the intended event.
What does the 2025 catalogue say about weight?
It gives indicative averages of 4.5kg for Ultra Carbon and 6.2kg for fibreglass Ultra, with sample variation possible.
Does an S-M designation guarantee the fit?
Use the drawing for the actual supplied version and check the driver in the shell; external widths and a waist measurement alone cannot establish the fit.
Does it have to be used without padding?
The shell was designed for use without padding, with optional Ultra pad kits available; match the exact kit to the seat reference.
Are the mounting parts included?
The live listings are seat-only, so specify compatible side supports, vehicle fittings and fixings separately.
Later related reading
For a purchase now, our current seat-choice guide works through use, fit and approval.
Check the Ultra in your complete seating setup
Send the car, driver measurements and intended use so we can check the seat revision, padding and mounting parts together. Book ahead if you want to compare seats in the showroom.
Need help checking the seat and fittings?
Tell us the car and driver measurements so we can check the exact seat and mounting arrangement.



