Superlite GTA Classic Bucket Seats: Now On Display at GSM Performance
New in the showroom, June 2025
A pair of Superlite GTA Classic bucket seats has just joined our retro seat display. It is the first time we have had these in the showroom, and they have already caught plenty of eyes with their black vinyl, rows of silver eyelets and separate headrest on two posts.
The GTA Classic looks like it belongs in a car from the 1970s or 80s, but it is built to fit a classic car with today's mounting hardware. It is a seat for period-looking interiors, and it suits cars like the classic Mini, the Mk1 Escort and retro restomods. The pair is out on the floor for anyone who wants to sit in it.
- New on display: a pair of Superlite GTA Classic bucket seats
- Black vinyl trim with silver eyelets and a headrest on two posts
- Supplied with sliding runners already fitted
- Uses a 291mm wide base mounting pattern
- A slim seat for the smaller cabins of classic cars

What is on this page
About the Superlite GTA Classic
The GTA Classic is designed to give a classic car the right look without the drawbacks of a genuinely old seat. The black vinyl is stitched into panels across the back and cushion, each set with silver eyelets, and a padded headrest sits on two chrome posts above it.
- A classic bucket shape with supportive side bolsters
- Black vinyl trim, which is hard wearing and wipes clean
- Silver eyelets and a headrest on posts for a period look
- Sliding runners supplied already fitted
- A compact shell for smaller classic cabins

It is a seat about style first, but one that still works with the modern frames most classic builds now use. For a car that is driven and enjoyed, that is exactly the balance people want.
A slim seat for smaller cabins
One of the GTA Classic’s biggest advantages is how slim it is. Classic cars were built around thin seats, and there is often little room between the door card and an offset transmission tunnel. A slim shell like this gives you support on a twisty road without fighting the cabin for space.
It also suits cars whose original seats were very basic. You get a clear step up in comfort and support, and the car still looks right from outside. Before you choose any seat for a classic, measure the space between the door card and the tunnel at seat height; our guide to measuring your classic for a seat shows how.
Installation: what you need to know
The GTA Classic comes with sliding runners already fitted, so part of the job is done before it arrives. The runners bolt down on a 291mm wide base pattern, which is the width Cobra use on their vehicle-specific frames for classic cars.
Many frames from other makers use a wider 345mm pattern. Where that is the only frame made for your car, the widths have to be matched properly before the seat goes in. Do not assume one maker’s frame will line up with another’s runners. Tell us the car and we will work out the right fitting route for it, including whether a frame exists for your model.
Garreth’s advice for any classic is to send us a couple of photos of the floor with the old seats out. It is the quickest way to see what mounting points the car has.
The Superlite classic range
Superlite make their seats for classic car owners who want a better seat without losing the character of the car. Alongside the GTA Classic, the range includes the Roadster, the Alpine and the RS-M, each with its own take on the vintage bucket, from simple low-backed shapes to deeper race-inspired designs.
They suit builds like a period Ford Escort, a stripped out MGB for track days or a 1980s BMW restomod, where a modern-looking race seat would spoil the interior.
In the showroom and ready to try
The pair of GTA Classics is on display now, so you can sit in one, feel the vinyl and the bolsters, and compare it side by side with other retro-inspired seats from Cobra and Corbeau.
If you are still deciding on a seat for a classic build, bring your measurements, or photos of the interior, when you visit. It makes it much easier to judge whether a seat will fit your car and your build before you commit to a pair.
What is the Superlite GTA Classic?
A retro-styled bucket seat in black vinyl with silver eyelets and a headrest on two posts, made for classic cars.
Does the Superlite GTA Classic come with runners?
Yes. It is supplied with sliding runners already fitted.
What bolt pattern does the GTA Classic use?
It uses a 291mm wide base pattern, the width Cobra use on their classic car frames.
Which cars suit the GTA Classic?
It suits classic cars with smaller cabins, such as the classic Mini, Mk1 Escort and retro restomods.
💬
New on displayThe GTA Classic
Period looks for a classic interior, with runners fitted and a slim shell.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.
