Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Sparco Rev QRT FIA Bucket Seats Back In Stock

Bucket seat news, June 2024

The Sparco Rev QRT is back in stock, ready to go out straight away or to collect from the showroom. It is the seat we point most people to when they want an FIA approved bucket without spending more than they need to.

To go with it, one of our customers has put a video on YouTube showing a pair of Sparco Rev seats going into their Peugeot 205 on OMP subframes. Here is what the Rev QRT is, how it compares with the Evo QRT, and the video.

  • The Sparco Rev QRT is back in stock for dispatch or collection
  • Approved to FIA 8855-1999, and HANS compatible
  • Shell weight of 7.1 kg, made using Sparco's QRT process
  • Listed for drivers with a 32 to 36 inch waist
  • Side mount seat: needs side mounts and a subframe for the car
  • Takes 4 point and 6 point harnesses
A black Sparco Rev bucket seat in the passenger side of a red Peugeot 205 with a stripped interior, the driver sitting in the matching seat
Sparco Rev seats in a customer's Peugeot 205, a still from their fitting video.

What the Rev QRT is

The Rev QRT is the entry point to Sparco’s FIA approved fibreglass bucket seats. It is approved to FIA 8855-1999, it is HANS compatible, and it takes both 4 point and 6 point harnesses. The QRT in the name is Sparco’s resin process for the shell, which keeps the weight down without making it flimsy: the Rev QRT weighs 7.1 kg.

Comfort is better than the price suggests. There is lumbar support built into the shell, and non slip fabric on the shoulders and the base cushion to stop you moving about. The rear harness slots are large, so the shoulder straps can pass through at the right height for a range of drivers.

Like every FIA bucket, it is a side mount seat. It needs a pair of side mounts and a subframe or base frame to suit the car, and we can put those together with the seat if you tell us what you drive.

Rev QRT or Evo QRT?

The Rev and the Evo look alike in photos, and we are often asked the difference. The Rev is the more compact shell and the lighter on the wallet. Our listing gives it a 32 to 36 inch waist range.

The Evo QRT comes in three sizes. The standard Evo suits a waist up to about 34 inches, the Evo L up to about 36, and the Evo XL around 38. It has a low leg cushion and lumbar support, and it is the most widely fitted of the QRT seats we sell.

Two black Sparco Rev bucket seats with blue Rev logos fitted in a car with a black interior
A pair of Sparco Rev seats in a customer's car.

Garreth’s advice is to measure your waist and hips before choosing, then sit in one if you can get to the showroom. A bucket that is a little snug is what you want; one that pinches at the hips will be miserable after twenty minutes. Our guide to which Sparco Evo QRT seat is right for you goes through the three Evo sizes in more detail.

A customer's Peugeot 205 fitting

One of our customers, who posts as Petrol Paul on YouTube, filmed the fitting of a pair of Sparco Rev seats in their Peugeot 205, mounted on OMP subframes. It is a useful watch if you are about to do the job yourself: the old seats come out, the side mounts go onto the new seats, and the seats go into the car on the subframes.

The part people tend to rush is the seating position. Set the height and the fore and aft position with you sat in the seat before the final tightening, and check every bolt afterwards.

Ready to go out

The Rev QRT is available as a single seat, as a pair, and as a bundle with a harness. If you are building a car from scratch, tell us the make and model and we will add the right side mounts and subframe so everything arrives together.

We love seeing how customers fit their seats, so if you film or photograph your install, send it over.

Yes. The Rev QRT is approved to FIA 8855-1999.

The seat weighs 7.1 kg.

Our listing gives a 32 to 36 inch waist range.

The Rev is the more compact entry seat; the Evo QRT comes in three sizes for waists up to about 34, 36 and 38 inches.

Yes. It is a side mount seat and needs side mounts and a subframe or base frame for the car.

💬
Back in stockThe Sparco Rev QRT

An FIA 8855-1999 bucket at 7.1 kg, and the easiest way into an approved Sparco seat.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text