An OMP direct fit subframe for the Mitsubishi Colt Z30 CZT. Part number HC847-4514.
The chassis code and the variant are both in the title for a reason
The Colt ran across generations, and the CZT is a specific version of the Z30. Both parts of that need to match your car, because a frame cut for one Colt will not go in another.
If you are working from an import document rather than a UK V5, send it to us and we will read it. That is a common situation on this car and we would rather check it than have the frame come back.
What the CZT is
The turbocharged version, and the one people build. It is a small, light car with more power than the chassis was originally asked to handle, which is precisely the combination that makes a driver slide about in a soft seat.
The other Colt in this family is listed separately on the same HC847 stem.
Check the cabin width
A Colt is narrow. The frame is not the limiting factor, the space between the tunnel and the sill is, so measure before you choose a shell rather than after it arrives.
The detail
Steel, base mount, on the floor mounting points already in the car, so nothing is drilled and the originals come out whole.
Two bolt patterns: 345mm by 271mm for Sparco, OMP and Corbeau base mount seats, 405mm by 290mm for Recaro. Sold singly and handed, so order twice for a pair.
Have you written anything useful for my car?
Yes: Customer Question: How Do I Fit Recaro Seats Into My Mitsubishi Evo 9?, and Customer Car: BMW E39 With Bucket Seats Fitted Using Planted Technology Subframes. Those are written around the same car, from real fittings and customer questions, so they are worth a look before you decide.
Will this fit my car?
This frame is made for the Mitsubishi Colt Z30 CZT. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
It takes seats drilled 345mm x 271mm (the Sparco and OMP seat pattern) and 405mm x 290mm (the Recaro seat pattern). If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on OMP frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a base-mount frame: the seat bolts down through its base, the simpler stack that suits seats with a flat bottom and keeps the install low-fuss. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
