Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

The OMP RT Carbon And Fibreglass Motorsport Seat Has Arrived In The UK

Seat news, October 2024

The OMP RT has finally landed. OMP announced the seat at the start of the year, and after a long wait for production and shipping, our first delivery arrived this month. Every pre-order has now gone out to its customer, and we have seats in the showroom.

The RT is an FIA homologated fixed back seat, made in carbon or fibreglass, that OMP describe as street friendly. This post covers what it is, how the two shells differ, how it fits, and what you need to mount it.

  • The OMP RT has arrived, and all pre-orders have been sent out
  • FIA 8855-1999 homologated fixed back bucket seat, side mount
  • Two shells: carbon at around 5.2kg, or fibreglass at around 10kg
  • Leather with Alcantara padding; takes 4 and 6 point harnesses, HANS friendly
  • We list it for drivers under 6ft with a 32 to 36 inch waist
  • Seat only: add approved side mounts and a sub-frame for your car
Two OMP RT bucket seats in black leather with grey Alcantara pads and OMP logos on the showroom floor, with helmets on the shelves behind
Our first OMP RT seats on the showroom floor, October 2024.

The first delivery is here

The RT was one of the most asked about seats of the year. OMP released it early in 2024 and took their time over production, so the first seats have only just reached us. The pre-orders we took went out first, and the rest of the delivery is now on the showroom floor, where you can see both the shell and the trim up close.

What makes the RT interesting is where it sits in the OMP range. It is a proper FIA homologated competition seat, but the bolsters hold you without making you climb over them, so it is easier to live with in a car that is also driven on the road than seats built purely for circuit use.

Carbon or fibreglass

The RT comes with a carbon or a fibreglass shell, and that is the real decision. The carbon shell weighs around 5.2kg, and the fibreglass around 10kg. Both carry the same FIA 8855-1999 homologation, so the carbon is not buying you a better approval: it is buying you about five kilos and a stiffer shell.

For a road car or a club car, the fibreglass is the sensible buy. In a series where weight is counted properly, the carbon starts to make sense.

A row of OMP RT bucket seats with grey Alcantara pads seen from the side on the showroom carpet, with the glossy shell of another seat in the foreground
A row of OMP RT seats in the showroom, October 2024.

What you get

The seat is trimmed in leather with Alcantara padding, and the padded inserts are removable. OMP have given it a wide leg cushion for comfort and lower sides to make getting in and out of the car easier, which matters in a caged car. The shoulder harness slots have their own moulded trim.

It takes a four point or a six point harness and is HANS friendly, so it works with a head and neck restraint. It has no separate head support wings. On our listing we put it as a fit for drivers under six foot with a waist of 32 to 36 inches, and Garreth’s advice, as with any fixed back seat, is to sit in one before you buy if you can.

OMP RT
HomologationFIA 8855-1999
ShellCarbon or fibreglass
WeightAbout 5.2kg carbon, about 10kg fibreglass
TrimLeather with Alcantara padding
Harness4 point and 6 point, HANS friendly
MountingSide mount, seat only

What you need to fit it

The RT is sold as seat only and it is side mounted. To fit it you need a pair of approved side mounts and a sub-frame made for your car, with sliding runners in between if you want to move the seat. An approved seat on unapproved mounts is not an approved installation, so if the car is going through scrutineering, the whole stack matters. Our guide to alloy side mounts explains the choices.

Set the height and angle before you fit your harness, because moving the seat afterwards moves your shoulder line. And an FIA seat’s homologation runs from its date of manufacture, so ask us to read the date off the seat before you order.

Yes. It is homologated to FIA 8855-1999.

Weight: the carbon shell is around 5.2kg and the fibreglass around 10kg, with the same FIA homologation.

A four point or six point harness, and it is HANS friendly.

No. It is seat only, so you need side mounts and a sub-frame for your car.

Yes. Our first delivery is on the showroom floor.

💬
Just arrivedThe OMP RT

An FIA seat that is easy to live with, in carbon or fibreglass.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text