Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Mirco Seat Delivery: Custom Orders and Plenty of New Stock

Delivery day, April 2025

A big Mirco delivery has landed, and it is one we had been waiting for. It restocks the Mirco seats on our showroom display, and it brought in a run of fully customised customer orders, which show just how far Mirco's options go.

This delivery had special trims, embroidery, diamond stitching and strong colours. We have picked out nine seats to go through: seven are FIA 8855-1999 homologated competition seats, and two are road and track seats. For each one we give the hip and shoulder widths we work to, and what it suits.

  • A large Mirco delivery in April 2025: showroom restock plus customer orders
  • Nine seats featured: RS7, RTX-7 (two), RS1, Classic (two), S3000, XL and RTS-2
  • The RS7, RTX-7, RS1, Classic and RTS-2 are FIA 8855-1999 homologated
  • The S3000 and XL are road and track seats, not FIA homologated
  • Several of the custom designs were added to our site as ready-made editions
  • Standard black versions are on the showroom floor to try
Mirco bucket seats from the April 2025 delivery on the showroom floor, including an orange RS7 Limited Edition, an RTX-7 with green stitching, a blue seat and a Mirco Classic with houndstooth centres
Part of the April 2025 Mirco delivery on our showroom floor.

The FIA competition seats

1. Mirco RS7 in black and orange 3D spacer fabric. A fibreglass shell for serious competition, from club racing up, homologated to FIA 8855-1999. Deep side bolsters and shoulder supports hold the driver in place in hard corners, and the 3D spacer fabric breathes on long stints. It takes a 4 or 6 point harness. Hip width 39cm, shoulder width 59cm, and our listing gives a 32 to 36 inch waist. Standard black RS7 3D seats are on the showroom floor to try.

2. Mirco RTX-7 in black velour with fluorescent green stitching. The RTX-7 has aggressive side and shoulder bolsters and FIA 8855-1999 homologation. The bright green stitching lifts an otherwise stealthy seat, and the velour is soft with good grip on the body. Hip width 39cm, shoulder width 59cm. Standard black velour RTX-7s are in the showroom.

3. Mirco RTX-7 in 3D spacer fabric with M-style stitching. The same FIA shell with breathable 3D spacer fabric and tricolour stitching across the upper backrest, a nod to BMW’s M colours, which will suit a track-prepared BMW. It has high leg support and takes a 5 or 6 point harness. Hip width 39cm, shoulder width 59cm.

4. Mirco RS1 in split black and orange velour. An FIA 8855-1999 fibreglass seat with high sides, broad shoulder wings and high leg bolsters that keep the lower body still under braking. The orange and black split trim makes it stand out. Hip width 39cm, shoulder width 59cm. Standard black RS1s are in the showroom to try.

Two Mirco Classics

5. Mirco Classic in black vinyl with houndstooth panels. Period looks on a current FIA 8855-1999 shell, with low sides that look right in classic and historic cars. The vinyl is hard wearing and easy to clean, and the houndstooth centres add texture. Hip width 42cm, shoulder width 57cm.

6. Mirco Classic in velour with blue stitching. The same shell in black velour with blue contrast stitching, a quiet way to add a little colour to a classic interior. Hip width 42cm, shoulder width 57cm. Standard black velour Classics are on the showroom floor.

A pair of Mirco Classic bucket seats in black vinyl with houndstooth centre panels on the showroom floor
The pair of Mirco Classics in black vinyl with houndstooth centres.

Road and track seats: S3000 and XL

7. Mirco S3000 in black velour with pink stitching. The S3000 is one of the most customisable seats Mirco make, and this customer’s pair shows it: black velour, pink stitching, diamond quilted centres, custom embroidery and a carbon-effect rear shell. It is a road and track seat, not FIA homologated, so it suits track days and fast road cars. Hip width 40cm, shoulder width 60cm.

8. Mirco XL in grey suede. The XL is the wide shell in the range, for bigger drivers who want a bucket seat that is still comfortable. This one is in grey suede all over, with deep side bolsters. It is also road and track only, not FIA homologated. Hip width 45cm, shoulder width 60cm, and our listing covers a 32 to 40 inch waist.

The Mirco RTS-2

9. Mirco RTS-2 in 3D spacer fabric with blue centres. Black outer bolsters with blue centre sections, in breathable 3D spacer fabric. The RTS-2 sits slightly narrower than the RS7 and the S3000, so it works in tighter cockpits, and it keeps FIA 8855-1999 homologation. It is side mounted and takes a full harness. Hip width 39cm, shoulder width 58cm.

Every seat here is side mounted and sold as the seat only, so you will need side mounts and a subframe for your car. Tell us the car and we will match them.

SeatHip widthShoulder widthApproval
RS739cm59cmFIA 8855-1999
RTX-739cm59cmFIA 8855-1999
RS139cm59cmFIA 8855-1999
Classic42cm57cmFIA 8855-1999
RTS-239cm58cmFIA 8855-1999
S300040cm60cmRoad and track
XL45cm60cmRoad and track

Custom designs you can order straight away

Choosing every option on a custom seat takes time, so we have added several designs from this delivery to the site as ready-made editions, with the options already applied. They include the RTX-7 with fluorescent green stitching, the Classic with houndstooth centres and the grey suede XL, each matching what came into the showroom. If you want something different again, the made to order options are still there on each seat.

For the rest of the range, the showroom has Mirco pairs in black velour and 3D spacer fabric, the most straightforward and popular trims. Garreth’s advice is to sit in the standard version first, then decide on the trim. If you cannot get to us, send your height and waist and we will tell you which shell suits. Our bucket seat head support depths guide compares shells we have measured.

The RS7, RTX-7, RS1, Classic and RTS-2 are FIA 8855-1999 homologated.

No. It is a road and track seat, for track days and fast road cars.

The Mirco XL, with a 45cm hip width in the figures we work to.

Yes. Several of these designs are on our site as ready-made editions, and every Mirco can be made to order.

No. They are side mount seats sold on their own; side mounts and a subframe are extra.

💬
From this deliveryThe RTX-7 in green stitch

An FIA 8855-1999 shell with a custom look, ready to order as it came in.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text