Introducing Jass Performance: Now Available At GSM Performance
New brand, October 2024
We have added a new brand to the range this month. Jass Performance make seat brackets and adapter rails for the Mazda MX-5, and their parts solve the problem most tall MX-5 owners run into sooner or later: sitting too high in a small car.
There are four Jass parts on the site to start with, covering the Mk1 and Mk2, the Mk3 NC and the Mk4 ND. Here is what each one does and how to pick the right one for your car and seat.
- Jass Performance make seat brackets and adapter rails for the Mazda MX-5
- Four parts at launch, covering the Mk1, Mk2, Mk3 NC and Mk4 ND
- The Mk3 NC adapters come in versions for height adjustable and non height adjustable seats
- Seat drops listed from 1 inch to 2.5 inches, depending on the part
- All four are listed as Road and Track, in steel, for the driver or passenger side

What is on this page
Who Jass Performance are
Jass Performance concentrate on the Mazda MX-5, and their seat brackets are well known among owners. The Mk3 NC lowering brackets in particular come up again and again on the MX-5 Owners Club forum, where owners post their own fitting write ups and before and after seat heights.
That focus is why we wanted them. The MX-5 is a small car, and taller drivers often find their head close to the roof. Lowering the seat is the simplest fix, and a bracket made for the exact car keeps the job straightforward.
Lowering adapters for the Mk3 NC
The Mk3 NC gets two versions, because NC seats come in height adjustable and fixed height versions. The adapters attach to the factory seat rails and set the whole seat lower in the car.
The version for height adjustable seats gives a 1.5 inch drop. The version for non height adjustable seats comes in two drops, 1 inch or 2.5 inches. Both are steel, powder coated black, and sold for the driver or passenger side.

If you are not sure which seats your NC has, send us a photo of the side of the seat base and we will help you check before you order.
The Mk4 ND and the Mk1 and Mk2
For the Mk4 ND there are fixed seat lowering adapters with a 2.2 inch drop, again in black powder coated steel and sold for either side.
For the Mk1 and Mk2 the Jass part does a different job. Their Sparco adapter rails let you mount an aftermarket seat in the older cars, and the listing gives the Sparco R100 and Sparco Sprint as the compatible seats. They are steel and zinc, powder coated red, and come as driver or passenger side.
-
From £93.00 Incl. VATFrom £77.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £64.00 Incl. VATFrom £53.33 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £154.99 Incl. VATFrom £129.16 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £42.00 Incl. VATFrom £35.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Watch them being fitted
Two MX-5 owners have filmed the Jass brackets going into an NC, and both videos are worth watching before you start. The first, from Miata Trips, shows the brackets going under the factory Recaro seat in an NC2.
The second, from Drive Break Fix Repeat, covers the same job on another NC and explains why the owner thinks it is worth doing. Garreth’s advice is to measure your seated head room before and after, so you know exactly what you have gained.
What do Jass Performance make?
Seat brackets and adapter rails for the Mazda MX-5, including lowering adapters for the Mk3 NC and Mk4 ND.
How much lower will my seat sit?
The Mk3 NC adapters are listed with a 1, 1.5 or 2.5 inch drop depending on the version, and the Mk4 ND adapters with a 2.2 inch drop.
Do I need to know if my NC seats are height adjustable?
Yes. Jass make separate NC adapters for height adjustable and non height adjustable seats, so check your seat before ordering.
Which seats do the Mk1 and Mk2 adapter rails suit?
The listing gives the Sparco R100 and Sparco Sprint as the compatible seats.
💬
New in the rangeJass Performance for the MX-5
Brackets made for the exact car, so a tall driver can sit lower.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




