Customer Ford Escort with OMP TRS Velour Seats
Customer cars, June 2025
A customer sent us these photos of their Ford Escort, and we wanted to share them. It is a heavily modified show car, and inside it runs a pair of OMP TRS-E velour bucket seats from us, with purple harnesses that tie in with the rest of the interior.
The TRS-E is one of the seats we sell most of, so it is good to see a pair doing a job in a car like this. Here is a look at the interior, the seat itself, how it mounts and the rest of the OMP TRS range.
- A customer's modified Ford Escort show car
- A pair of OMP TRS-E seats in black velour
- Purple harnesses matched to purple details around the cabin
- The TRS-E is FIA 8855-1999 homologated, on a tubular steel frame
- It can be base mounted or side mounted
- The wider TRS-E XL covers a 36 to 42 inch waist

The car and its interior
The Escort has been built as a show car, with a lot of work outside and in. From the photos, the cabin has been stripped and fitted with a cage, aluminium chequer plate on the floor and rear deck, a suede wheel on a quick release boss, and purple details: the harnesses, the gear knob, the door pulls and the boss.
The seats are a pair of OMP TRS-E in black velour. Plain black works well here. It lets the purple harnesses stand out and keeps the interior looking like a motorsport build and not a colour scheme.
This view from the door shows how the harnesses sit. The shoulder straps come through the upper slots in the seat back, and the lap and crutch straps come up through the base, which is what the TRS-E's five harness slots are there for.
The seat's medium height bolsters leave the door area clear, which makes getting in and out of a caged car easier than a deep bolstered shell would.

The OMP TRS-E
The TRS-E is OMP’s entry into FIA homologated competition seats. It is built on a tubular steel frame, not a moulded composite shell, and that is what keeps an FIA 8855-1999 seat at a sensible price. It weighs 10.3kg, which is more than a fibreglass shell, and for a club or show car that is a trade most people are happy to make.
- FIA 8855-1999 homologated
- Tubular steel frame
- Hard wearing velour trim, in black, blue or red
- Medium height side bolsters
- Removable leg cushions
- Five harness slots, for a four or six point belt
- Head and neck restraint compatible
The removable leg cushions are worth knowing about. Taking them out or putting them in changes the effective depth of the cushion, which is how one shell suits drivers with different leg lengths. They also come out for cleaning.
Will it fit you?
OMP’s dimensions for the TRS-E are a shoulder width of 585mm, a base width of 510mm, an internal seat width of 390mm, a depth of 470mm and a height of 890mm.
We list the standard TRS-E for drivers under six feet with a waist up to about 36 inches. For bigger drivers there is the TRS-E XL, a wider shell for a 36 to 42 inch waist, which weighs 12.3kg. Garreth’s advice is to sit in both if you are between the two, and we have the TRS range on display in the showroom so you can.
How it mounts
The standard TRS-E can be base mounted or side mounted, which is unusual for an approved seat and one reason it goes into so many cars. Where side mounting is awkward, it can go on a base mount subframe instead. If you side mount it, you need approved side mounts and a subframe made for the car. The XL is side mount only.
The seat is supplied on its own, so the frame and runners or mounts are separate. Frames and seat patterns vary between makers, so tell us the car and the seat before you order the frame and we will match them. An approved seat on mounts that are not right for it is not an approved installation.
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The OMP TRS range
The TRS-E is part of OMP’s steel frame range, which all share the same idea: an FIA approved seat at an affordable price. As well as the standard TRS-E in black, blue or red velour, we have the TRS-E XL for bigger drivers, the TRS-E Sky, and paired listings of the TRS-E and TRS-E XL for when both front seats are going in at once. The XL is the newest addition to the pairs we keep on display.
Steel frame seats are heavier than fibreglass, but they are often easier on the budget and simpler to fit. Fibreglass and carbon shells are lighter and suit more serious race builds. For a dual purpose or show car like this Escort, the TRS-E sits in the middle well: approved, comfortable enough for the road, and hard wearing. Our guide to bucket seat materials goes into velour and the other trims.
Adding harnesses
Harnesses are what finish an interior like this. OMP make four and six point harnesses in several colours, and other makers offer a wider choice again, including brighter colours like the purple here. Whatever the colour, choose the harness for how the car is used first: a road approved harness for road use, an FIA harness for competition, and check the label shows the approval you need.
If you are putting a set together, send us the seats and the car and we will suggest harnesses that suit.
What seats are in this Escort?
A pair of OMP TRS-E bucket seats in black velour.
Is the OMP TRS-E FIA approved?
Yes. It is homologated to FIA 8855-1999.
Can the TRS-E be base mounted?
Yes. The standard TRS-E can be base mounted or side mounted; the XL is side mount only.
What size driver does the TRS-E suit?
We list it for drivers under six feet with a waist up to about 36 inches; the XL covers 36 to 42 inches.
Do the seats come with brackets?
No. They are supplied as the seat only, so tell us the car and we will match the frame and mounts.
💬
In this carOMP TRS-E velour
An FIA approved steel frame seat that base or side mounts, in three colours.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



