Customer Car With OMP Seats & Takata Harnesses
Customer cars, May 2021
We supplied one of our customers with a pair of OMP Champ R fibreglass bucket seats and a set of Takata Race 3x2 harnesses for their track car. The car is stripped inside and has a white roll cage, and the black seats with green belts look superb against it.
The seats and the harnesses are all FIA approved, so as well as being ready for track days, the car can take part in events that ask for FIA homologated seats and belts if the owner decides to.
- Seats: a pair of OMP Champ R fibreglass bucket seats
- Harnesses: Takata Race 3x2, 6 point
- Seats approved to FIA 8855-1999, harnesses FIA approved
- The car is stripped and has a white roll cage
- Ready for track days and FIA homologated events

What is on this page
The OMP Champ R seats
The Champ R is a gel coated fibreglass shell, approved to FIA 8855-1999, and it sits in the middle of OMP's competition range. A composite shell holds its shape under cornering loads in a way a steel framed seat cannot quite match, and it is lighter too.
It has large shoulder supports and big side supports for the legs. That hold stops the driver sliding around, so they can concentrate on the track, which is what helps with consistent lap times. The Champ R suits drivers with around a 32 inch waist.

The Takata Race 3x2 harnesses
The Takata Race 3x2 is a 6 point harness, with three inch shoulder straps and two inch lap straps. It works well with the Champ R, because the seat has the right harness slots for all six straps, so every strap runs through the shell the way it should.
These belts also suit cars with a roll bar or cage, like this one, where the shoulder straps can be anchored properly behind the seats.

-
From £448.80 Incl. VATFrom £374.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Fitting seats like these
The Champ R is a side mount seat, so each one needs approved side mounts and a frame for the car. An approved seat on unapproved mounts is not an approved installation, so the mounts are part of the job, not an extra. We have a range of fitting kits that suit our OMP seats.
Garreth’s advice is to pick the seat for the driver first, then the frame for the car. Tell us the car and the driver’s height and waist and we will put the seat, the mounts and the frame together. Our harness fitting guide covers where the belts need to be anchored.
Which seats went into this customer's car?
A pair of OMP Champ R fibreglass bucket seats, approved to FIA 8855-1999.
Which harnesses did the customer choose?
Takata Race 3×2 6 point harnesses in green.
What does 3x2 mean on a Takata harness?
Three inch shoulder straps and two inch lap straps.
Does the OMP Champ R need side mounts?
Yes. It is a side mount seat and needs approved side mounts and a frame for the car.
💬
Why it worksApproved seats and belts, ready to compete
A pair of OMP Champ R seats with Takata Race 3x2 harnesses in a caged track car.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



