Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Citroen Xsara Five-Door Bucket Seat Guide

Identify the four passenger doors before choosing the Xsara kit

The Xsara replaced the ZX in 1997, and Citroën offered both five-door and three-door Coupé versions. This guide follows our fitting listing called Xsara 4-Door: the ordinary hatchback has four passenger doors plus its rear hatch. Keep that body description separate from a Coupé or Xsara Picasso when asking about seats.

Our listed Recaro route carries shop reference 686619-1809. Garreth would compare reclining seat shapes before choosing trim, while Cameron would match the actual vehicle details to the maker’s N6 application. The manufacturer distinguishes the ordinary Xsara and Break from the Coupé with different fitting references.

Front three-quarter view of an illustrative modified blue facelift Citroen Xsara five-door hatchback with white wheels, four passenger doors, black bucket seats and red harnesses visible through the windscreen
Illustrative modified Citroen Xsara five-door, not a customer installation.

At a glance

  • Guide scope: Xsara hatchback with four passenger doors, commonly described as five-door including the hatch.
  • Shop kit: 686619-1809; the corresponding manufacturer family is 68.66.19/-29.
  • Recaro’s vehicle document identifies ordinary Xsara and Break under type N6, with a four-passenger-door condition.
  • The Xsara Coupé is listed separately with 85.91.16/-26; Picasso also has its own guide and application.
  • The shop suffix is retained as our listing reference, without assuming it proves a different manufacturer frame design.

The ordinary Xsara’s Recaro fitting application

The fitting listing shown here is called Citroen Xsara 4-Door and carries shop reference 686619-1809. Recaro’s documents identify Xsara and Xsara Break type N6 with 68.66.19/-29 and a four-door condition. Give us the actual vehicle details and body when confirming the current supplied kit.

That door count refers to the passenger doors used in the fitting application. Citroën describes the hatchback body as a five-door when the rear hatch is included. This guide therefore concerns the ordinary four-passenger-door hatchback, without relying on a separate saloon description.

Cameron would check the complete reference on the actual supplied parts and the physical seating side. The shop suffix -1809 is useful for finding this listing, but the manufacturer document uses the 68.66.19 family. It does not establish a unique Xsara floor pattern from that suffix alone.

Separate the hatchback, Coupé, Break and Picasso

The maker’s Coupé row names 85.91.16/-26 and carries its own two-door condition. It should not be selected from the ordinary Xsara’s 68.66.19 row. Confirm a three-door car as a separate fitting enquiry.

The Break is grouped with the ordinary Xsara in the N6 application, with exact vehicle details still checked. Xsara Picasso has a different body and fitting reference, covered in its own guide. Keep the full model name on the enquiry so those applications stay clear.

Recaro identifies vehicle types and detailed entries, without giving a promise for every registration year in this guide. Send the year, body and vehicle-type details with photographs of the original mounts. A similar-looking front end alone cannot identify the complete fitting arrangement.

Compare Sportster CS, Speed and Expert S

Recaro’s Sportster document identifies the ordinary Xsara N6 application, and its Modular document provides the Speed and Expert route. The three seats give different cushions, bolsters and backrest shapes to try. Confirm the exact version against the actual car and current supplied kit.

Garreth would compare the Sportster’s more pronounced support with the Expert’s different access shape, then try the Speed before settling on trim. Cameron would check the controls and buckle clearance in the actual interior. Move the backrest through the range needed for normal use.

The manufacturer’s Xsara row also permits an optional 20mm seat-raising arrangement. That is a configuration detail to confirm if needed, not a claim that a spacer is supplied or that every assembly needs one. Judge the position with the complete parts list and driver present.

Confirm the supplied runner and lower fittings

The Endurance Motorsport Recaro-compatible runner is shown as a separate adjustment option to discuss with the confirmed assembly. Establish what comes with the actual vehicle kit before ordering another runner set. The maker’s vehicle application document identifies a fitting reference, without listing every part in our supplied package.

Cameron would check the seat-to-runner and runner-to-car connections, release handle and required fasteners. Any spacers or adaptors belong on that same parts list. Trial the assembled position and move the seat through the travel needed by each driver.

Measure the Expert cushion envelope in the Xsara

Recaro’s Expert S/M drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below draws the cushion envelope at one scale. Compare it with the actual space available before checking the backrest, headrest and controls.

The fitting hardware sits beneath the cushion and changes the final driving position. This is a seat envelope, not a vehicle floor-hole pattern. Measure the complete assembly with the driver when judging headroom and reach.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Plan a fixed-back bucket as a complete fitting enquiry

The reclining-seat documents used here do not establish a Pole Position, Profi or other competition shell on this kit. A side-mounted seat needs its own matching supports and a verified connection to the vehicle fittings. The Recaro name on both products is insufficient to specify that assembly.

Garreth would try the shell for support and normal entry before choosing it for the car. Cameron would check the exact seat instructions and all parts below it. Send the intended shell reference with photographs of the current mounts so the alternative arrangement can be assessed.

Match the belt arrangement to the chosen seat

The four-point examples and six-point competition option shown here have different strap and attachment layouts. Begin with the intended use, then check the seat’s belt openings and the belt manufacturer’s routing instructions. A comfort recliner and a competition bucket can require quite different arrangements.

Cameron would check the available attachment positions, buckle access and any rear-seat use that needs to remain. The vehicle seat kit does not establish harness attachment points. Keep the belt enquiry with the seat choice so the proposed interior can be considered together.

Trial the driving position with all mounting parts

Send the year, body, vehicle-type details and physical seating side with photographs of the present mounts. Include the original adjustment features and any previous seat changes. Match the seat and current supplied kit to the manufacturer’s application and fitting instructions.

With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the runner and backrest through the range you need, then check clearance with the door closed. Garreth would finish by trying normal entry and exit; Cameron would repeat the movement and locking checks after tightening.

Common questions

The ordinary hatchback has four passenger doors plus the rear hatch. The fitting application uses the passenger-door count, while Citroën describes the body as a five-door hatchback. Confirm the actual body and vehicle details with the kit.

Our shop reference is 686619-1809. Recaro identifies Xsara and Break type N6 under 68.66.19/-29 with a four-door condition. Check the current supplied manufacturer reference, exact car and seating side.

The manufacturer lists the Xsara Coupé separately under 85.91.16/-26. A three-door car needs that separate application check. Do not select it from the ordinary Xsara’s 68.66.19 row.

Xsara Picasso has its own vehicle application and separate guide. Include the full model name when asking about parts; the shared Xsara name does not establish the same fittings.

The cited Xsara application permits an optional 20mm seat-raising arrangement. Confirm whether that configuration is needed and what is supplied with the exact kit. The note does not establish a universal required spacer or an installed seat height.

Confirm the contents of the actual supplied kit before ordering extra rails. The application reference is not a packing list. Identify the runner, adaptors, spacers and fasteners needed by the exact seat.

The reclining-seat applications do not establish a fixed-shell combination. Give us the exact bucket-seat and vehicle details for a complete fitting enquiry, including the seat’s matching supports and its connection to the lower assembly.

The cushion, runner and vehicle fittings all affect the finished height. Trial the whole assembly with the driver and check the controls and headroom. The Expert cushion drawing cannot predict a height reduction.

Garreth’s top tip

Garreth would choose the support shape before trying to match the original interior trim. Compare the Sportster CS, Speed and Expert S for the journeys you make, including how you get over the side bolster. Keep everyday use of the rear seats in mind while choosing the front pair.

Cameron’s fitting view

Cameron would begin with four passenger doors, the N6 application details and the exact seat. He would match the actual supplied 68.66.19 arrangement to the car and identify the runner contents. The Coupé and Picasso references stay separate throughout that check.

Plan your Citroen Xsara five-door seat change

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text