Audi S3 Build with Corbeau RRB Reclining Sport Seats
Customer car, May 2025
This Audi S3 belongs to one of our customers, and it has just been fitted with a pair of Corbeau RRB reclining sport seats that we supplied. The S3's cabin was already neat and sporty; the RRBs give it a far more supportive, bucket-like seat without losing anything a daily driven car needs.
The RRB has deep leg and shoulder bolsters, a reclining back, and a mix of black cloth and carbon-effect vinyl that sits well against the Audi's dark interior. It is a seat for a car that gets driven hard at the weekend and commutes during the week, and this S3 does both.
- Car: the customer's second generation (8P) Audi S3
- Seats: a pair of Corbeau Sportline RRB reclining sport seats
- Trim: black cloth centre with carbon-effect vinyl bolsters
- Road and track seats, not FIA approved, with a reclining back
- Base mount, sold as the seat only; a heated version is also listed
- Corbeau's drawing: 93cm tall, 54cm across the shoulders, 47cm across the base

What is on this page
The Corbeau RRB: support for a road car
The RRB is one of the Corbeau recliners people ask to sit in most often in our showroom. It is built for road use with a track day on the side, so it combines proper side support with the adjustment a daily driver needs.
- High leg bolsters and pronounced shoulder support
- Black cloth centre with carbon-effect vinyl on the bolsters and back
- A reclining backrest, so it tilts for access and adjusts for comfort
- Harness slots in the backrest for a four point harness
- Road and track approval; it is not an FIA seat
The feel is close to a fixed bucket, but you keep the recline and the everyday comfort that a fixed seat cannot give you. The vinyl bolsters wipe clean, and the cloth centre does not get hot in summer.
Try it before you buy
The best way to choose a seat like this is to sit in it, and the RRB is on display in our showroom. You can feel how the leg and shoulder bolsters hold you, which photos never really show, and compare it with Corbeau’s other recliners or with a fixed-back bucket side by side.
There is also a heated version of the RRB, with the same shape and trim and a heating element built into each seat. It needs its own wiring loom and switch, so plan the electrical work alongside the fitting. For a car used all year, it is a popular upgrade.
RRB sizes: will it fit?
For a seat with this much support, the RRB is compact. Corbeau's drawing gives these figures for the standard seat:
- Overall height: 93cm
- Width across the shoulder bolsters: 54cm
- Width across the base: 47cm
- Cushion depth: 55cm
That narrow footprint lets it sit in cars like the S3 with clearance to the door card and the centre console. Everyone is built differently, so send us your height and waist and we will tell you honestly whether the RRB will suit you.

How the RRB compares with other Corbeau recliners
Several of Corbeau’s Sportline recliners share the RRB’s styling and carbon-effect trim. The differences are in the shape:
- RRS. Softer bolsters and a comfort-first shape. The RRB is the more upright of the two, with more hold through the sides.
- SVR. A compact, shorter seat for smaller cabins and low roofs.
- PSR. Another good choice for tight spaces, with less aggressive bolstering.
If you want the most support you can get from a Corbeau recliner, the RRB is the one we point people to. If comfort on long journeys matters more, sit in the RRS as well before deciding.
Fitting the RRB in the Audi S3
The RRB is a base mount seat, so it sits on a vehicle-specific frame. For the second generation (8P) A3, which includes the S3, Corbeau make a direct fit frame that bolts to the car's standard floor fixings, usually without drilling. Corbeau list it for their own reclining and base mount seats.
Most road cars also need sliding runners, so more than one person can drive the car. Keep the runners Corbeau too, and match the runner to the seat and frame; Corbeau make them in 291mm, 345mm and 405mm versions. Recaro and Corbeau parts are not interchangeable, so do not mix them.

Garreth’s advice is to tell us the car’s year and the seats before ordering anything, and we will confirm the frame and runners as a set. Our guide to seat bolt patterns explains why the widths matter, and our guide to reclining seats for the Audi A3 Mk2 covers the same floor.
The finished S3
The RRBs suit this S3 well. The dark cloth and carbon-effect finish look at home next to Audi’s own trim, and the seats give the support you want on a good road without making the car a chore to live with. It is a good example of a seat change that transforms how a car feels to drive while keeping it every bit as usable.
Is the Corbeau RRB FIA approved?
No. It is a road and track reclining seat, suited to road cars and track days.
How big is the Corbeau RRB?
Corbeau’s drawing gives 93cm high, 54cm across the shoulders and 47cm across the base.
Is there a heated Corbeau RRB?
Yes. A heated version is listed, and it needs its own wiring loom and switch.
What frame does an Audi S3 8P need?
Corbeau’s direct fit frame for the A3 8P covers the S3 and bolts to the standard floor fixings.
Can I use Recaro runners with a Corbeau seat?
No. Recaro and Corbeau are not compatible, so keep the runners Corbeau.
💬
The seat in this buildCorbeau RRB
The most support in Corbeau's recliner range, with the practicality a daily S3 needs.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.


