Fitting A Bolt-In Roll Cage To An Alfa Romeo Alfetta GTV: What Trim, Carpet And Headlining Has To Come Out?
A customer asked us which trim, carpet and headlining has to come out to fit a bolt-in cage in an Alfetta GTV, and whether the headlining can stay. None of the four cages we list for this car comes with a trim removal list or a headlining clearance figure. What the makers do print is where the feet land, so carpet and underfelt come out under every foot, and the headlining is something we measure with you before you order.
- Every fact comes from the live product listings for the four GTV cages
- Prices inc VAT, read from the live site
- If a maker doesn't print a figure, we say so and tell you what to measure

Carpet and underfelt out at the feet. Headlining: not confirmed by any maker.
£971.87inc VAT
Four bolt-in cages are listed for the Alfetta GTV, from Sparco, OMP and Safety Devices.
- Carpet and underfelt come out wherever a foot sits, because a cage is never fitted over them.
- Safety Devices put the front feet on box plates on the sills and the rear feet on the floor and rear wheel arches.
- No listing prints a headlining clearance, so we cannot tell you the lining survives.
- Measure the roof gap at the hoop positions and send it to us before you order.
Where each cage meets the shell
Which trim comes out depends on where the cage touches the car, so here’s what each of the four Alfetta GTV listings says about its feet, its door bars and its tube.
| Cage | Feet and mounting | Door bars | Tube |
|---|---|---|---|
| Sparco 00723182 | 6 feet, no other shell attachment | Included, with a mounting kit | Main hoop 50 mm x 2 mm, other tubes 50 mm x 2 mm or 40 mm x 2 mm |
| OMP AA/104P/5 | 6 fixing points, with feet brackets to weld onto the floor | One pair, cut to measure and welded on installation | Fe45 steel, tube size not printed |
| Safety Devices A004 front | Box plates on the sills, runs in front of the dashboard | Universal door bars, one per side, chosen separately | Steel, tube size not printed |
| Safety Devices A004 rear | Floor and rear wheel arches, listed as clearing normal trim and the dashboard | Listing refers to universal door bars | Steel, tube size not printed |
From the live product listings. OMP list the GTV as 1978-1987, Sparco and Safety Devices as 1974-1987.
Carpet, underfelt and trim
Carpet and underfelt come out under every foot. Our bolt-in install guide is plain that a cage is never fitted over carpet or underfelt, so each plate sits on bare metal.
On the GTV that means the floor where the front and rear feet land. It also means the sills if you go for the Safety Devices front section, and the rear wheel arches if you go for the Safety Devices rear section. Lift the carpet right back from those spots first and have a look at the metal before you decide how much more trim to take away.
Past that, no maker prints a list of trim panels for this car. The Safety Devices rear listing says the cage clears normal trim and the dashboard, and the front listing says the front section runs in front of the dashboard. We’d rather tell you that than guess which panels your car needs off.
Can the headlining stay?
We can’t confirm it: none of the four listings gives a roof clearance or says the headlining can stay in place, and we won’t tell you it fits when the makers haven’t.
What we can give you is what to measure. The Sparco main hoop is 50 mm tube with a 2 mm wall, and the other tubes on that cage are 50 mm or 40 mm. Add the padding you’ll wrap round the tube. Then measure the gap between the roof panel and the headlining at the points where the hoops would pass. Give us those figures in millimetres.
Send them over with the cage you’re looking at and we’ll compare them with what the maker prints, then tell you what we can and can’t confirm. Drop us an email or click to open a chat.
Measure the gap
Roof panel to headlining at the hoop positions, in millimetres.
Add the tube
The Sparco hoop is 50 mm across. Add the padding thickness on top.
Send it to us
Give us your measurements and the cage you are looking at.
Sparco Alfetta GTV 6 Point Bolt In Roll Cage with Door Bars
The Sparco cage is made from E255 (FE45) cold drawn steel tube and attaches to the shell by its six feet, with no other shell attachment. The listing says that suits race and rally regulations which do not allow multi point cages.
It weighs 25 kg, comes unpainted, and the door bars and a mounting kit are included. The listing gives homologation as FIA Appendix J. Garreth would start here for a GTV that needs door bars, because they arrive with the cage.
- From £971.87 inc VAT
- 6 fixing points, FE45 steel
- Main hoop 50 mm x 2 mm
- Door bars and mounting kit included
Product cards show prices excluding VAT. Prices in the text include VAT.
OMP Alfetta GTV Roll Cage, part number AA/104P/5
The OMP cage is FE45 steel, supplied in two halves, a front section and a rear section. It carries feature code A2SX: single door reinforcements, sleeve connecting tubes and one diagonal on the rear arm.
The feet brackets are welded onto the floor, and the listing says no fitting bolts are included. The door bars are cut to measure and welded on installation. It weighs 27 kg and comes in bare metal ready to paint.
- From £770.14 inc VAT
- 6 fixing points, FE45 steel
- Code A2SX
- Two halves, feet brackets welded to the floor
Safety Devices Alfetta GTV Coupe 6 Point Bolt-In Roll Cage
This is the full A004 listing. The front section mounts on box plates on the sills and runs in front of the dashboard, and you choose a rear section to go with it: a single fixed diagonal, the same with a harness bar, or a cross diagonal with a harness bar. Door bars are a separate option, one per side.
The listing says the cage is independently certified and MSA and FIA homologated, and the finish is black powder coat unless you ask for another.
- From £894.00 inc VAT
- Front section on box plates on the sills
- Rear section chosen from three designs
- Powder coat in black, grey, charcoal grey, silver, white or red
-
From £894.00 Incl. VATFrom £745.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Safety Devices Alfetta GTV Coupe Bolt-In Rear Roll Cage
You can buy the rear section of the A004 on its own. The listing says it clears normal trim and the dashboard, and that the rear mounts to the floor and the rear wheel arches. It comes as a single fixed diagonal, the same with a harness bar, or a cross diagonal with a harness bar.
If you want to leave the front of the interior alone, Garreth would look at this one. Cameron would still lift the carpet at the rear feet and check the wheel arch metal first.
- From £536.40 inc VAT
- Floor and rear wheel arch mounting
- Three rear designs
- Listed as clearing normal trim and the dashboard
-
From £536.40 Incl. VATFrom £447.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Common questions
Do I have to take the carpet out?
Yes, at every foot, because our bolt-in guide says never fit a cage over carpet or underfelt.
Can I keep the headlining?
We cannot confirm it. No listing for this car prints a roof clearance. Measure the gap from roof panel to headlining at the hoop positions and send it to us.
Where do the front feet go?
The Safety Devices listing puts the front section on box plates on the sills, running in front of the dashboard, while the Sparco and OMP listings print six feet without saying where each one lands.
Does the rear cage clear the trim on its own?
The Safety Devices rear listing says it clears normal trim and the dashboard, mounts to the floor and rear wheel arches, and may be used alone.
Are door bars included?
They are with the Sparco cage, OMP supply a pair that are cut to measure and welded on installation, and Safety Devices list universal door bars as a separate option, one per side.
Is bolt-in really bolt-in?
The cage bolts together and bolts down, but plates under the feet are usually welded to the shell, and the OMP listing says its feet brackets are welded to the floor. Our bolt-in install guide goes through it.
Do you fit the cage?
No, we supply cages and do not fit them, and our fitting cost guide covers what a fitter charges.
What we would buy
Garreth
Garreth's top tip
For an Alfetta GTV I would take the Sparco cage. The door bars and the mounting kit come in the box, and it sits on six feet with nothing else tied to the shell.
If you only want the rear half, the Safety Devices rear section is the one, because the listing says it clears normal trim.
Cameron
Cameron's fitting view
Before anything's ordered, lift the carpet and underfelt at each foot, have a look at the bare metal, then measure the roof gap.
Send me the gap and I'll compare it with what the maker prints, so you know where you stand on the headlining.
Want the headlining question checked for your car?
Give us your roof gap measurements and the cage you're looking at. Cally, our digital receptionist, takes your details, and Cameron comes back to you with what the maker confirms.

