Citroen Xsara Picasso Bucket Seat Guide
Choose the front seat around the Picasso’s everyday use
The Xsara Picasso is the rounded compact MPV in Citroën’s range, with a tall roof and a family-car interior. A front-seat change may be about support on a long journey as much as the appearance of the cabin. Keep Xsara Picasso on the fitting enquiry so it is identified separately from a Xsara hatchback or a later C4 Picasso.
We list a Recaro vehicle kit for this model. Garreth would try the reclining seat shapes before choosing a covering, while Cameron would identify the seat’s exact version and the parts needed below it. The vehicle kit, runner and seat connection need to form one planned assembly.

At a glance
- Vehicle: Citroen Xsara Picasso, with the year and physical seating side confirmed on the enquiry.
- Listed fitting kit: Recaro 687019; Recaro’s application table writes the reference as 68.70.19.
- Seat families identified in that row include Sportster CS, SR/Speed and Expert/Specialist.
- Confirm runner contents and the exact seat connection before adding separate sliders or brackets.
- Compare the complete driving position, control access and rear-seat use in the actual car.
The Xsara Picasso Recaro fitting kit
Our Xsara Picasso frame is listed as 687019. Recaro’s own vehicle table names Xsara Picasso with reference 68.70.19, so the vehicle application can be checked against the maker rather than inferred from a shared Citroën platform.
The maker’s row does not give a model-year range or a detailed vehicle-type entry. Include the year, body details and physical seat position with the order, and confirm the current supplied kit. The Xsara Picasso application is distinct from the ordinary Xsara and C4 Picasso.
Cameron would ask for photographs of the existing mounts and any parts already fitted. That matters if the car has had another set of aftermarket seats, a repaired floor or a replacement interior. We want to identify the connections present before selecting the new assembly.
Compare Sportster CS, Speed and Expert S
The Sportster CS, Speed and Expert S give different support shapes to try. The Sportster CS has a more pronounced bucket-like form; the Expert S is worth trying when access over the side bolster is part of the decision. Sit in the actual seats to compare the cushion and backrest.
Recaro’s Xsara Picasso row identifies these seat families, with the exact seat version and supplied fitting kit still checked before ordering. Garreth would choose by the support you want through a normal journey. Cameron would then check how the cushion position, backrest and controls work in the car.
Retain the practical checks that made you choose an MPV in the first place: entry and exit, access beside the front seats and the rear-seat use you need. A reclining backrest also needs space to move behind the seat.
-
From £1,581.30 Incl. VATFrom £1,317.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,001.70 Incl. VATFrom £834.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,197.00 Incl. VATFrom £997.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the runner and lower assembly
The Endurance Motorsport Recaro-compatible runner is shown as a separate adjustment option to discuss with the kit. Its card does not mean that you need another runner beside a complete supplied assembly. First establish which rails, adaptor pieces and fasteners come with the actual Xsara Picasso kit.
Recaro’s vehicle table establishes an application, but it is not an inventory of every part in our supplied package. Cameron would check the seat-to-runner and runner-to-car connections before calling the parts list complete. A general statement that every Recaro frame has integrated runners is not enough to select the extra hardware.
Try the required travel with the driver in position. Check that the release is reachable, both rails operate together and movement keeps the cushion clear of the tunnel and buckle. The chosen runner and mounting parts also affect the finished seat height.
Measure the Expert cushion in the Picasso
Recaro’s Expert drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below is drawn at one scale. Use it to compare the cushion envelope with the space available in the actual vehicle.
Check the backrest, headrest and controls separately, including their movement. The drawing excludes the fitting hardware and is not a Picasso floor-hole pattern. It cannot give an installed seat height without the rest of the assembly.
Plan a fixed-back seat enquiry separately
The current Xsara Picasso row leaves the Pole Position ABE and Podium columns blank. We have therefore based this kit’s seat shortlist on the reclining families that Recaro identifies. Adding side mounts alone does not establish a fixed-shell combination for this frame.
If a fixed-back bucket is the direction you want, send the exact seat and vehicle details before choosing the lower fittings. Garreth would try the support and access first; Cameron would look for evidence for the complete alternative assembly. A bucket fitted to another Citroën does not prove that arrangement for the Picasso.
Match the belt layout to the seat and intended use
The TRS four-point examples and six-point competition option shown here have different attachment and strap arrangements. They are options to discuss for a suitable build, not an automatic consequence of changing the front seat. Decide how each seating position will be used before choosing a harness.
Cameron would compare the belt manufacturer’s routing instructions with the seat openings, buckle access and available attachment positions. Keep the use of the rear seats in that discussion. The Recaro vehicle kit establishes the seat connection, not the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the driving position before final tightening
Record the year, body details and physical seat position, then photograph the existing mounting arrangement. Identify the Recaro seat and every part below it. Follow the supplied kit instructions and use the specified fasteners at each connection.
Sit the driver in the proposed position and check the wheel and pedals. Move the runner and recline the backrest through the range needed for everyday use. Check that the controls and buckle can be reached without the seat or rail fouling the surrounding interior.
Garreth would finish the decision with a practical entry-and-exit check. Cameron would make the same checks after the assembly is tightened, including the release and locking action. Compare the finished arrangement with how the car will actually be shared and used.
Common questions
We list Recaro frame 687019. Recaro’s own application table names Xsara Picasso with reference 68.70.19. Confirm the year, exact seat version and physical seating side with the current supplied kit.
The maker table gives Xsara Picasso its own application. Keep the complete model name on the enquiry and check the exact supplied kit; a shared brand, platform or Picasso name does not establish the same seat fittings.
Sportster CS, SR/Speed and Expert/Specialist are identified in Recaro’s Xsara Picasso row. Try the exact seat for support and access, then confirm its version and complete lower assembly.
The current Xsara Picasso row leaves Pole Position ABE and Podium blank. We do not recommend those shells on this kit from a generic Recaro label. A fixed-back enquiry needs evidence for its own complete seat-and-fitting arrangement.
Confirm the actual package contents before ordering extra rails. Recaro’s vehicle application table is not a packing list. Identify the runner, adaptors and fasteners supplied with your exact kit and chosen seat.
There is no promised height reduction in this guide. The cushion, runner and lower mounting parts all affect the result. Trial the full assembly with the driver and check controls, movement and headroom.
Include the access and rear-seat use you need when choosing the front seat and any belt arrangement. Trial the front-seat travel and backrest movement in the actual car. The front fitting kit alone does not establish the whole interior arrangement.
Garreth’s top tip
Garreth would try the Expert S and Sportster CS back to back before choosing the direction for a Picasso. Compare support on a normal journey with the ease of getting in and out, then choose the covering. Keep the car’s everyday use central to the decision.
Cameron’s fitting view
Cameron would begin with the full Xsara Picasso model name, year and current mount photographs. He would match 68.70.19 to the actual supplied kit and chosen seat, identify the runner contents and trial the whole driving position. The final check includes the controls, buckle and space behind the backrest.
Plan your Citroen Xsara Picasso seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Recaro’s current vehicle and seat application table and the linked current seat and fitting listings.







