Our Definitive Guide To Morgan 4 Roll Cages From Safety Devices
Roll cage guide
A rear roll cage is one of the most useful upgrades you can make to a Morgan Plus 4 or 4/4, whether you are heading for sprints and hill climbs or just want more protection on track days. Safety Devices make a range of bolt-in rear cages for Morgan, each built for a specific model and layout.
The differences between them are small but they matter: engine, chassis, number of seats and year all decide which cage fits. Here is the range, what sets each one apart, and what to check before you order.
- All the Safety Devices Morgan cages here are bolt-in rear cages
- The right cage depends on model, engine, chassis and number of seats
- Most include bushes for the seat belt mounts
- Some versions are listed as homologated, others are not for competition
- Check your championship rules with your scrutineer before ordering

What is on this page
Why fit a roll cage to a Morgan?
The Morgan is light and fun to drive, but it was never designed around modern rollover protection. A rear roll cage gives the occupants protection in a roll, and it gives a proper anchorage for harnesses, which matters as soon as you fit bucket seats.
The Safety Devices Morgan cages bolt in, built for each model, so there is no welding and the cage can come out again if needed. That suits owners who want protection without changing the character or originality of the car.
Do you need one if the car is only used on the road? No, but many owners fit a rear cage for peace of mind, and for track days and competition it is a very sensible step.
Competition use and approval
The approval differs between cages and even between options of the same cage. Some of the Safety Devices Morgan cages are listed as homologated, while specific options, such as rear cages with no diagonal, are marked as not for competition use.
Championship rules also change, so before any event check the cage, and the option you are ordering, with your scrutineer and your series regulations. If you tell us what you are entering, we will make sure you order the right version.
The Safety Devices Morgan range
Morgan Plus 4 (2 seats) 4 point bolt-in rear roll cage (M000). For the Plus 4 and 4/4 two-seaters with the M16 engine. A four-point bolt-in rear cage with bushes for the seat belt mounts. It comes with a single fixed diagonal, or with no diagonal, and the no-diagonal version is not for competition use. The standard finish is black powder coat, with grey, blue, silver, white and red available, or unpainted on request.
Morgan Plus 8 and Plus 4 with T16 engine rear roll cage (M001). For the Plus 8 two-seater and the Plus 4 with the T16 engine, which uses the Plus 8 chassis. A four-point bolt-in rear cage with a single fixed diagonal, available with or without a harness bar, and with bushes for the seat belt mounts. It fits cars with the short or long door, the chrome inner or Rover door lock, and inertia reel belts.
Morgan Plus 4 and 4/4 (4 seats) rear roll cage (M002). For the four-seater cars: the 4/4 four-seater with the Ford Crossflow engine (1968 to 1992) and the two-door cars from 1968 to 2003. A four-point bolt-in rear cage with a single fixed diagonal and bushes for the seat belt mounts.
Morgan Plus 4 (Plus 8 chassis) bolt-in rear roll bar (M003). For the Plus 8 two-seater and the Plus 4 with the T16 engine. It is similar to the M001 but around 100mm taller, with a cross diagonal and harness bars, and optional universal door bars that clamp to a tube at the front of the car.

Morgan Plus 4 (2010 to 2020) bolt-in rear roll cage (M008). For the later Plus 4 two-seater. A four-point bolt-in rear cage with a cross diagonal and harness bar. Safety Devices list this one as not for competition use and not homologated, so it is a road and track day cage.
-
From £530.40 Incl. VATFrom £442.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £580.80 Incl. VATFrom £484.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Which cage is right for your Morgan?
| Your car | Cage |
|---|---|
| Plus 4 or 4/4, two seats, M16 engine | M000 rear cage |
| Plus 8, or Plus 4 with T16 engine (Plus 8 chassis) | M001 rear cage, or the taller M003 |
| 4/4 or Plus 4 four-seater | M002 rear cage |
| Plus 4 two-seater, 2010 to 2020 | M008 rear cage (not for competition) |
The easiest way to get it right is to send us the model, year, engine and number of seats, and whether the car is used in competition. We will confirm the cage and the option before you order. For an older two-seater, our answer to a question about roll cages for a 1976 Morgan 4/4 two seater walks through a real example.
Fitting and professional installation
These cages bolt in, but fitting still needs care. The cage has to be aligned properly, and every mounting bolted and tightened as the instructions require, or it will not do its job in an accident. Garreth’s advice is to have it fitted by an experienced installer, especially if the car will be used in competition, and to have the finished installation checked by your scrutineer.
Roof, trim and interior
A common question is whether a rear cage stops the hood or trim fitting. These cages are made to fit inside the car, but how they sit with your hood, hardtop or interior trim depends on the car and the cage. Our guide on keeping soft top use with a Safety Devices roll cage covers this, and if your car has bespoke trim, measure carefully before ordering.
Building a complete setup
A rear cage is often the start of a wider upgrade. Once there is a proper anchorage behind the seats, many owners add bucket seats for better support and harnesses for track use. Several of the Morgan cages include a harness bar option for exactly that reason.
Space in a Morgan is limited, so the seat, cage and harness need to be planned together. Tell us your height, the car and how you use it, and we will suggest a combination that fits.
Do Safety Devices Morgan cages need welding?
No. The cages in this guide are bolt-in rear cages built for specific Morgan models.
Which cage fits a Morgan Plus 4 with the T16 engine?
The M001 rear cage or the taller M003 rear bar, both made for the Plus 8 chassis the T16 cars use.
Is there a cage for the four-seater Morgan?
Yes. The M002 rear cage is made for the 4/4 and Plus 4 four-seaters.
Can I use these cages in competition?
Some options are listed as homologated and others are not for competition. Check the cage and option with your scrutineer and your series rules.
Do I need a roll cage for road use?
No, but a rear cage adds protection and a harness anchorage, which many owners want for track days.
💬
Get the right oneMatch the cage to the car
Model, engine, chassis and seats decide which Safety Devices cage fits your Morgan.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.


