Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Audi TT Mk1 with Mirco RTS-2 Seats, A Track-Ready Build

Customer car, May 2025

This Audi TT Mk1 is a customer's car that has just been turned into a proper track car inside. The owner fitted a pair of Mirco RTS-2 FIA fixed-back bucket seats, mounted with OMP direct fit frames, Sparco sliding runners and Endurance Motorsport multi-point side mounts, and finished with black OMP four point harnesses.

The plan is to take it to Goodwood, and the brief for the seats was simple: plenty of hold, a fabric that stays cool, and FIA homologation. The RTS-2 in its black mesh fabric ticks all three, and it looks the part in the TT's dark cabin.

  • Car: the customer's Audi TT Mk1 coupe, being prepared for track days
  • Seats: a pair of Mirco RTS-2 fixed-back bucket seats, FIA 8855-1999
  • Mirco's drawing: 590mm at the shoulders, 430mm at the hips, 920mm tall
  • Frames: OMP direct fit TT Mk1 frames with Sparco sliding runners
  • Side mounts: Endurance Motorsport multi-point M8 brackets
  • Harnesses: black OMP 801 four point harnesses
Two black Mirco RTS-2 Limited Edition bucket seats with black OMP four point harnesses inside a customer's Audi TT Mk1
The customer's TT Mk1 with its Mirco RTS-2 seats and OMP harnesses fitted.

The Mirco RTS-2

The RTS-2 is Mirco’s fixed-back fibreglass bucket seat homologated to FIA 8855-1999. It is one of the most popular Mirco seats we sell, mainly because it covers a lot of drivers at a sensible price.

  • FIA 8855-1999 homologation
  • A rigid fibreglass shell with a fixed back
  • High shoulder supports and deep leg bolsters
  • Trimmed in 3D mesh spacer fabric, which breathes, or in velour
  • Four or six point harness slots, and HANS friendly
  • Listed in two widths, for a 32 to 36 inch or a 36 to 40 inch waist, and for drivers over or under six feet

The seats in this TT are the RTS-2 Limited Edition, in black mesh with white stitching. The mesh is the practical choice for a track car: it runs cooler than velour on a warm day, and it grips you well through the corners.

RTS-2 sizes and the TT Mk1

Getting a full-size FIA bucket into a TT Mk1 is not always easy, and the RTS-2 is a good balance of support and size. Mirco's drawing gives:

  • Width across the shoulders (A): 590mm
  • Width across the hips (C): 430mm
  • Overall height (E): 920mm
  • Depth (D): 630mm

In this TT it sits comfortably clear of the door cards and the centre tunnel. From what we have seen, a seat much wider than this at the shoulders is likely to start running into clearance problems in a Mk1, so the RTS-2 makes a useful yardstick when you are measuring up.

Mirco's dimension drawing of the RTS-2 seat, homologation number CS.496.22, with measurements A to H in millimetres
Mirco's own drawing of the RTS-2 with its measurements.

Try one in the showroom

Choosing a bucket seat is a big decision, so we keep the RTS-2 on display for customers to sit in. You can try the mesh and the velour trims, feel how the bolsters hold you, and compare it side by side with FIA seats from Sparco, OMP and Corbeau.

Garreth’s advice is to bring your helmet and your measurements if you are planning a visit. Sitting in the seat with a helmet on tells you far more about head clearance and shoulder room than any measurement on paper.

How the seats were mounted

The customer put together a set of parts that suit a side mount FIA seat in the TT:

  • OMP Audi TT Mk1 direct fit frames. Made for the Mk1 floor and its mounting points, on the 345mm by 271mm base pattern.
  • Sparco sliding runners. Fitted between the frame and the side mounts to keep fore and aft adjustment.
  • Endurance Motorsport multi-point M8 side mounts. Plenty of holes for adjusting the seat's height and angle, and made for M8 seats like the Mirco.
The silver Audi TT Mk1 with the passenger door open, showing the Mirco RTS-2 seats, OMP harnesses and the stripped rear of the cabin
Door open on the finished TT, with the rear of the cabin stripped out.

Every car and driver is different, so tell us the seat, the car and how it will be used and we will confirm the parts before you order. If the car is going to be used in competition, check the seat mounting and harness against your series rules with your scrutineer first. Our guide to seat bolt patterns explains how frames, runners and side mounts fit together.

OMP 801 harnesses

To finish the job the customer fitted a pair of black OMP 801 four point harnesses. They use 3 inch shoulder and lap straps, which spread the load well across the body, and an aircraft style quick release buckle. They route neatly through the RTS-2’s harness slots, and the black webbing with yellow OMP logos suits the interior.

The 801 is approved to FIA 8854-1998, and 3 inch shoulder straps are not the right choice with a HANS device, so anyone running a head and neck restraint should use a 2 inch FHR harness. For track days, it is a comfortable, well made belt. Our guide on how to fit a motorsport harness covers the anchor points.

Why Mirco for a track car

Mirco have a good name with track day drivers for FIA homologated seats at a sensible price, and their range comes in plenty of sizes. The RTS-2 in particular suits taller drivers who need room, cars with a moderate amount of cabin space, and track or competition builds.

They can also be personalised. Beyond black, Mirco offer many trim and shell colours, and personal name embroidery, so the seats can be made to match a car’s livery. Anything other than the standard black seat is made to order, so allow time for that.

Goodwood bound

With the RTS-2s, the frames, the side mounts and the harnesses in place, this TT has a cockpit ready for a day on track. The mesh trim will help on a long hot session, and the fixed-back shells give the kind of hold a road seat never can. We look forward to hearing how it gets on at Goodwood.

Yes. This customer fitted a pair using OMP TT Mk1 frames, Sparco runners and Endurance multi-point side mounts.

Mirco’s drawing gives 590mm across the shoulders and 430mm across the hips, with an overall height of 920mm.

Yes. It is homologated to FIA 8855-1999.

3D mesh spacer fabric and velour, with more colours and embroidery made to order.

It is not the right choice with a HANS; use a 2 inch FHR harness instead.

💬
The seat in this buildMirco RTS-2

An FIA bucket that fits a TT Mk1 and covers a wide range of drivers.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text