OMP RT fibreglass seats: our March 2025 delivery
These showroom photographs record the OMP RT fibreglass seat delivery we announced in March 2025.
If you are choosing one now, check the exact shell and trim, then try the fit with your driving kit. The delivery shown here does not establish today’s stock or a dispatch date.

What is on this page
What arrived in March 2025
The original announcement reported the first 2025 batch arriving after the previous year’s delivery had sold through. It also offered seats for dispatch or collection at the time. Those availability details belong to March 2025.
The photographs show an unpacked RT alongside wrapped seats in the showroom. Before travelling to try one, ask us to confirm which version is available to sit in; a photograph of a past delivery cannot confirm today’s display.
For a current order, use the OMP RT product listing and ask us about the selected version, seat label, lead time and collection arrangements.
Fibreglass and carbon are separate versions
OMP identifies the fibreglass RT as HA0-0832-A01 and the RT Carbon family as HA0-0831. Both are FIA 8855-1999 models. Carbon construction does not give the seat a higher FIA standard or establish that it suits your car or event.
Current catalogue check: OMP’s 2026 car-parts catalogue lists 6.7kg for the fibreglass RT and 5.2kg for RT Carbon. Its seat-table notes describe these as complete-seat figures with a 10% tolerance. The fibreglass figure is not roughly twice the carbon figure, and the catalogue does not support the earlier five-kilogram saving claim.
Earlier catalogues give different weights. Use the full code and the specification for the actual version being supplied, especially when comparing an older seat with a current order. The 2026 figures are a present-day comparison, not a measurement of the seats photographed in March 2025.
The pads, trim and driver fit
The separate padded inserts and lower side bolsters are useful details to assess when trying an RT. Check support at the hips and shoulders, access to the car and pedal reach with your normal footwear.
OMP’s 2024 catalogue describes Alcantara and leather finishes; its 2026 catalogue uses leather and suede-microfibre descriptions for the RT variants. Confirm the exact trim and full code before ordering. A similar-looking dark pad does not establish its material.
Garreth or Cameron can help compare the version, mounting position and driver measurements. A height or waist range is only a starting point: it cannot guarantee support, belt alignment or headroom.

OMP lists five harness slots and HANS compatibility for the RT family. Those are seat features, not approval of every four-, five- or six-point belt installation. Follow the exact seat, harness and head-restraint instructions and the rules for the intended use.
Our seat and harness guide covers the separate routing and anchorage checks. Harness webbing must not be attached to the seat shell simply because it passes through a slot.
The linked single seat, pair and E92 package are different order options. Confirm the shell, trim and contents for each. The E92 package requires an exact vehicle and side check; the separate side mounts are not a complete car fitting kit or proof of an approved RT installation.
-
From £712.96 Incl. VATFrom £594.13 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,037.96 Incl. VATFrom £864.97 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £46.80 Incl. VATFrom £39.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Plan the seat, mounts and car together
The RT is side-mounted. OMP’s catalogue identifies type W fixings, M8 threads and a nominal 289mm side fixing interval. Do not treat the shop shorthand of 290mm as proof that any bracket will fit or create an approved assembly.
- Identify the full seat code and read its physical label and fitting instructions.
- Check the specified supports, vehicle attachment and any runners as one system.
- Assess driver position, cabin clearance and belt routing with the driver’s kit in place.
- Have a competent installer check the complete installation against the component instructions and applicable event requirements.
A seat’s FIA label does not approve an arbitrary bracket or floor attachment. Our guide to mismatched seat and base-plate fixings explains why matching some holes is insufficient. It concerns a different seat and is not an RT fitting template.
For competition, check the actual label date and event rules before buying. The FIA Technical List 12 identifies the RT’s OMP CW0092 and carbon CW0093 homologation models with lateral supports. Its latest possible validity year is not the expiry date of an individual seat.
Are the fibreglass and carbon RT FIA approved?
OMP lists both as FIA 8855-1999 seats. Match the exact code and physical label to the relevant homologation and event requirements; the shell material does not approve the whole installation.
Does the fibreglass RT weigh twice as much as carbon?
No. OMP’s 2026 catalogue lists 6.7kg for RT fibreglass and 5.2kg for RT Carbon, with a 10% complete-seat weight tolerance. Older catalogue figures differ, so confirm the supplied version.
Is the RT side-mounted?
Yes. OMP specifies type W side fixings with M8 threads and a nominal 289mm interval. Confirm the actual seat and support instructions before choosing mounts.
Will an RT fit me and my car?
Check the driver and the car together. Try the seat with your kit, assess shoulder and hip support, belt alignment, headroom and control reach, and confirm the complete mounting arrangement.
Can I still see the delivery shown here?
These photographs record the March 2025 delivery. Ask us which RT version is currently available to view or try before travelling, and confirm current stock and lead times separately.
Check the version before ordering
Send us your car, intended use and driver measurements so we can help identify the seat, trim and mounting details to check.
Choosing an OMP RT?
Confirm the version and a showroom appointment before travelling.




