Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Safety Devices Morgan roll cages: the 2025 range update

For the 2025 season, we have updated our Safety Devices Morgan listings to cover rear bars for specific Plus 4, Plus 8 and 4/4 applications and their different diagonal and harness-bar arrangements.

The useful starting point is the full cage code and the Morgan it was designed for. A choice of rear-bar layouts does not mean that every option has the same competition approval, or that a Plus 4 badge alone identifies the right cage.

A Safety Devices M001 bolt-in rear roll cage for a Morgan, wrapped in protective film, standing on a concrete floor in front of a steel shutter
A Safety Devices M001 rear cage for the Morgan Plus 8 and T16 Plus 4, still in its protective wrapping.

Current reference: the Morgan cage families

For anyone choosing a cage now, the notes here use Safety Devices’ current model information. Match the exact chassis, engine, body width and seating layout before ordering; do not treat this March 2025 range announcement as a certificate for your car.

  • M000: Plus 4 and 4/4 two-seaters with the M16 engine. The no-diagonal and fixed-diagonal versions have different approval conditions.
  • M001: Plus 8 two-seaters, and Plus 4 cars with the T16 engine on the Plus 8 chassis. Confirm the body-width version as well as the diagonal and harness-bar choice.
  • M002: Plus 4 and 4/4 four-seaters, with a single fixed diagonal. The four-seat application matters; it is not the two-seat M000.
  • M003: another family for the Plus 8 two-seater and T16 Plus 4 on the Plus 8 chassis. Confirm the selected bar’s actual height, body width and full specification from the manufacturer.
  • M008: Plus 4 two-seaters in the stated 2010–2020 application, with a cross diagonal and harness bar. Safety Devices specifies that it is not for competition use.

The product cards here link to four of these cage families. Some product images are generic layout illustrations; confirm the actual diagonal and harness-bar arrangement from the full order code, not the picture alone.

Diagonal, harness-bar and body-width choices

On M000, RBM000 4SSS is the version without a diagonal and RBM000 5SSS has a single fixed diagonal. On M001 and M003, the current manufacturer pages describe single-diagonal, single-diagonal with harness bar and cross-diagonal arrangements. Confirm which full code is supplied by the selected listing.

Safety Devices’ M001 application notes distinguish narrow and wide bodies around the 1999 change, using approximate distances between the wheel arches. The year boundary alone is not enough to choose a suffix. Send us the actual body details so the manufacturer can confirm the correct version.

M008 is listed in one cross-diagonal and harness-bar configuration. Its fixed design does not remove the need to check the chassis application or make it competition eligible. A harness bar also needs to suit the belt manufacturer’s mounting and routing requirements.

Our M000 listing describes black powdercoat as standard, with other finishes available by specification. Confirm the colour and finish for the exact cage being ordered; do not assume every family has identical options.

Check approval for the exact cage option

Safety Devices uses Motorsport UK/FIA homologation wording for several Morgan families. That is not blanket approval for every variant or every UK circuit event. The manufacturer’s M000 page specifically excludes RBM000 4SSS without a diagonal from competition and says it is not homologated.

The M008 page explicitly says “not for competition use”. Do not infer otherwise from a harness bar, a cross diagonal or a photograph of a car on track.

Before entering an event, match the complete cage code and its documentation to the car, class and current regulations. Check any uncertainty with the organiser or scrutineer and obtain the relevant manufacturer documentation. A shop approval attribute or the word “bolt-in” cannot settle that question.

Fitting checks before the cage is ordered

A bolt-in cage does not guarantee an installation without welding. The current Safety Devices fitting instructions describe reinforcement plates that may need welding into the vehicle. They are general instructions, so have the exact Morgan mounting arrangement confirmed before work starts.

Have a competent cage installer check the mounting areas, corrosion, previous repairs and any distortion. The manufacturer requires the cage to mount to the vehicle structure, without carpet or underfelt trapped underneath. Use the specified hardware and joint instructions; do not alter the cage to force it into an unsuitable car.

Plan the cage, seat position and belt route together. The manufacturer describes seat-belt mounting bushes on M000 to M003, but their presence does not approve every harness installation. Check the actual belt instructions, clearance around the driver and any required padding before finalising the parts.

Garreth would ask for the Morgan model, year, engine, two- or four-seat body and intended use first. Send Cameron those details, photographs of the mounting areas and the proposed full cage code. That gives us the information needed to resolve the fitment and approval questions with Safety Devices.

The Morgan cage collection brings the shop listings together so you can compare them before asking us to confirm the selected specification.

Related reading for a current installation

Our roll-cage approval guide explains why one approval label does not answer every use case. The seat and harness application guide covers model-specific belt routing checks. Use them alongside the current instructions for the cage and belts selected.

No. Safety Devices’ general instructions describe reinforcement plates that may need welding into the car. Confirm the exact Morgan cage and mounting arrangement with the manufacturer and a competent installer.

Send the model, year, engine, two- or four-seat layout, body-width details and intended use, together with the proposed full cage code. M001 and M003 include body-width choices; the badge or year alone is not enough.

No. Safety Devices excludes M000 RBM000 4SSS without a diagonal and specifies M008 as not for competition use. For other options, check the exact cage documentation and the current rules for the car and event.

Our M000 listing describes black as standard and other finishes by specification. Ask about the exact model and code before ordering; do not assume all Morgan cages share the same finish options.

Confirm the Morgan and the full cage code

Tell us the chassis, engine, seating layout and intended use so the correct version and documents can be checked.

Choosing a Morgan rear cage?

Send us the car details and intended use.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text