Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Fitting an SW Motorsports roll cage: check the exact kit

Does a bolt-in roll cage need welding? With SW Motorsports, the answer depends on the exact kit. The mounting method matters as much as whether the cage tubes bolt together. Start with your car's model, body style and the manufacturer's instructions. We sell Club Sport half cages, other track-day half cages, full bolt-in MSUK cages and weld-in kits; their fitting work is different.

  • Match the car, cage part number and intended use
  • Focus Mk2 Club Sport example uses existing mounting points
  • Full bolt-in kits can require welded foot plates
  • Use the exact kit's drawings and fixing instructions
Illustration of a red cage layout in a stripped vehicle interior
Illustrative cage layout. Confirm the exact SW kit's tube arrangement and mounting points from its manufacturer drawings.

Compare the mounting methods

Club Sport half cage

The Focus Mk2 Club Sport listing specifies existing fixings: the lower B-pillar seat-belt mounting for the main hoop and rear seat brackets for the rear legs. It states no welding or drilling for that application. Confirm the equivalent details on another car's listing before assuming the same method.

Other bolt-in half cages

The Golf Mk6 and Scirocco Mk3 listings describe bolt-in, no-welding installations. Whether the floor needs drilling, spreader plates or other preparation must come from the exact kit's instructions. The words bolt-in do not by themselves specify the shell preparation.

Full bolt-in MSUK cage

The Megane Mk3 full bolt-in kit is an example with welded foot plates. SW's manufacturer description also says the cage passes through the dashboard, which needs cutting and trimming. The cage is called bolt-in because of its assembly; the mounting plates still require welding.

Full weld-in kit

A weld-in cage adds tube assembly and welding work to the shell preparation. SW supplies its weld-in kits with pre-notched tubes, shaped foot plates, engineering drawings and dimension sheets. Use the documents for the kit you have. Do not use the bolt-in Megane example as an assembly plan for a different weld-in cage.

A full cage brings tubes forward into the cabin, so dashboard clearance, seat position and access need checking before the shell is prepared. SW uses model-specific scan data for its kits; that does not remove the need to check the actual car. The image is an illustration of a cage layout, not a fixing drawing or evidence that a particular kit will fit your car. Use the exact manufacturer drawings for the tube arrangement and mounting points.

Illustration of a red cage layout in a stripped vehicle interior
Illustrative cage layout. Confirm the exact SW kit's tube arrangement and mounting points from its manufacturer drawings.

Before you start

Read the instructions completely and check the supplied parts and fixings before stripping the cabin. Record the car’s generation, body style and roof configuration, then confirm which kit you have. A socket set, spanners and torque wrench cover part of the work on a bolt-in kit. Drilling equipment is relevant only where the instructions require holes; welding work needs suitable equipment and a competent cage installer. Ask for missing torque values or fixing details before starting.

  • Protect the cabin and remove seats, carpet and trim where the kit instructions require access.
  • Keep removed fixings labelled and check the proposed mounting areas for corrosion or previous repairs.
  • Check beneath any proposed drilling or welding area for wiring, fuel and brake lines.
  • Confirm seat, belt, harness and trim clearance before the final assembly.

Fitting a Club Sport half cage

  1. Identify the original mounting points specified for the exact Club Sport kit.
  2. Offer up the cage and align it with those points, following the manufacturer's order of assembly.
  3. Use the specified fixings and torque values; do not substitute a generic figure from another cage.
  4. Check clearance through the seat's adjustment range, belt operation and access to the fixings.

Trim work can vary between cars. Use the kit's inspection and recheck instructions after fitting, including any specified checks following track use.

Half cages that require new mounting holes

If the exact kit requires drilled holes and spreader plates, follow its mounting drawing and plate specification. Confirm the areas above and below the floor before drilling.

  1. Position the cage and plates using the kit drawing, and check access to all fixings.
  2. Have the proposed hole positions and nearby services checked before cutting the shell.
  3. Fit the supplied mounting arrangement in the instructed order and tighten to the specified values.
  4. Protect exposed metal and seal the finished openings as directed.

A no-welding description alone does not establish which drilling or floor preparation your car needs.

Full cages and welded mounting plates

For the Megane Mk3 full bolt-in example, plan for welded foot plates and a cage that passes through the dashboard. Have a cage fitter assess the shell, plate positions and dashboard work before the installation starts. Our listing excludes cars with a factory sliding sunroof; confirm the roof configuration before ordering.

SW’s manufacturer description specifies 38mm and 45mm tube with a 2.5mm wall in CDS steel to E355+N for that kit. Those dimensions describe the listed construction; they do not establish universal eligibility for every event or every cage option.

For a separate weld-in kit, the general preparation includes clearing the cabin, checking the foot-plate positions and preparing the mounting areas. Tube fitting, access for complete welds and assembly sequence belong to the exact kit drawings and the installer’s plan. Keep any required trimming within the manufacturer’s instructions.

Garreth’s top tip is to budget for the fitting work when choosing the cage. Cameron’s fitting view is to check the seat and belt arrangement before the mounting work is finalised. Have the installation checked against the intended competition’s requirements before use.

Choosing the right SW cage

Tell us the exact car, intended use and the cage you are considering. A Club Sport half cage and a full bolt-in MSUK cage can involve very different shell preparation even though both have bolted connections.

Use our SW Motorsports range to find the listed applications. Check the event’s requirements and the exact cage specification before choosing a competition kit; a tube size or marketing description alone does not establish eligibility.

The Focus Mk2 example specifies neither welding nor drilling and uses existing mounting points. Check the exact application before applying that statement to another car.

That depends on the exact kit, the shell preparation and your competence. Obtain the manufacturer instructions, fixing details and torque values before starting.

Yes. SW’s Megane Mk3 full bolt-in MSUK cage uses welded foot plates and passes through a dashboard that needs cutting and trimming.

SW describes the Megane Mk3 example as 38mm and 45mm diameter, 2.5mm wall CDS to E355+N. Confirm the material and tube specification of the exact cage and options ordered.

Check your event or championship requirements against the exact cage specification and installation. A generic bolt-in or MSUK label is not a complete eligibility check.

Related fitting guides

Our bolt-in cage guide and weld-in cage guide cover preparation questions alongside the kit-specific manufacturer instructions used for the actual installation.

Send the car and cage details

Send the model year, body style, roof configuration and intended use so we can identify the listed cage and the fitting work to discuss with your installer.

Check the cage application with us

Send the exact car and cage details so we can check the listed application.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text