Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Sparco Grid Q Sky: our February 2025 showroom pair

This pair of Sparco Grid Q Sky seats passed through our showroom in February 2025 before going out to a customer. We photographed the pair together and the vinyl backrest up close. The fabric Grid Q was on our display at the time. The Sky gave customers another trim to consider on the same Grid Q design, with a surface that is straightforward to wipe clean.

  • Grid Q Sky: Sparco code 008009RNRSKY
  • QRT shell, FIA 8855-1999 homologation
  • Sky upholstery with removable padded sections
  • M8 lateral fixing points on 290mm centres
A pair of black vinyl Sparco Grid Q Sky bucket seats side by side on the GSM Performance showroom floor
The customer's pair of Grid Q Sky seats in the showroom before dispatch, February 2025.

The pair that came through

The photographs show the integrated headrest, paired shoulder openings and separate padded sections on the backrest and base. The Grid-Q badge and large Sparco cushion logo are visible on both seats. Sparco’s 2025 catalogue, printed page 176, identifies the Grid Q and Grid Q Sky within the QRT range and gives FIA 8855-1999 homologation. The manufacturer’s code is 008009RNRSKY; our listing adds an S prefix to its shop reference.

The close-up shows the grain of the vinyl and the textured panels beside the shoulder openings. The padded backrest panel carries the Grid-Q badge below the slots. The separate pads let the driver assess support within the shell. Try the seat with your driving clothing and check where the shoulder openings sit relative to your shoulders.

Close up of the black vinyl backrest of a Sparco Grid Q Sky seat with the harness slots and blue edged Grid-Q badge
The harness slots and Grid-Q badge on the Sky's vinyl backrest.

What Sky means

Sky is Sparco’s upholstery designation for this vinyl-trimmed version. It gives a different surface feel and cleaning routine from the fabric Grid Q. A wipe-clean covering can be useful in an open car or a cabin that gets dusty or muddy. It does not make the complete seat waterproof: the pads, seams, shell and mountings still need appropriate care.

Grid Q fabric or Grid Q Sky?

Grid Q fabric and Sky, from Sparco's 2025 catalogue
DetailGrid Q fabricGrid Q Sky
Manufacturer code008009RNR008009RNRSKY
UpholsteryFabric and non-slip contact areasSky vinyl and non-slip contact areas
HomologationFIA 8855-1999FIA 8855-1999
FixingsM8 lateral, 290mm centresM8 lateral, 290mm centres
What to compareSurface feel and support with your clothingSurface feel, cleaning and care

Garreth’s top tip is to choose the covering for how the car is used, then try the actual seat for comfort. Fabric and vinyl feel different against driving clothing, and personal fit matters more than a general promise that one trim will be comfortable for everyone. The fabric Grid Q was also the seat we supplied for the customer Golf R drag project featured in January 2025. That is a separate installation story, with its own fitting parts.

Fitting the Grid Q

The Grid Q mounts at the sides. Sparco specifies M8 lateral fastenings on 290mm centres; this is the seat’s fixing interface, not a measurement of the car floor or the finished seating height.

Our listings recommend Sparco’s FIA steel side mounts and a vehicle-specific frame, supplied separately. Cameron’s fitting view is to check the shell, side mounts, frame and any runner together, then measure the driving position and cabin clearance. Our 32 to 36in waist category is a shop shortlist, not a guaranteed fit.

Our listing describes the Sky as four- and six-point harness compatible and HANS friendly. The actual harness route and FHR position still need to suit the driver, seat and car. Check the seat label and the event’s seat-standard requirements before competition use.

Grid Q side fixing centres: 290 millimetres between two M8 fixing points290mm between fixing centresM8M8

The Sky-upholstered version of the Sparco Grid Q QRT bucket seat, with FIA 8855-1999 homologation in the 2025 catalogue.

Sparco specifies M8 lateral fixings on 290mm centres. Check the recommended side mounts and the exact vehicle frame; these are separate fitting parts.

The listing describes the seat as HANS friendly. The FHR angle, driver position, harness route and approved helmet connection still need checking together.

Compare the surface feel with your driving clothing and the cleaning the car needs. Sky is wipe-clean vinyl, but it does not make the complete seat waterproof.

It is our shop shortlist category. Try the seat and check shoulder position, shell clearance and the finished driving position.

Later fitting advice and current listings

For a project now, read our seat-height and bucket-seat fitting guide. The cards show today's single, pair and bundle listings; this showroom pair was photographed in February 2025.

Check the seat and fitting parts together

Send the car, driver measurements and whether you need one seat or a pair so we can compare the fitting parts and arrange a seat fitting.

Need help checking the seat combination?

Send the car and seat details so we can check the fitting route.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text