The KTR-2RS is a direct-fit seat subframe for the Renault Megane 2 RS, covering the RS225, RS230, R26 and R26.R built from 2004 to 2009. It bolts to the original seat fixing points in the floor, replacing the standard runners with a fixed base for a bucket seat or recliner.
The Megane R26.R came from the factory with Sparco FIII bucket seats fitted on Sparco-pattern subframes. KTR Racing built this frame so that owners of every other Mk2 Megane RS can make the same conversion. The subframe is laser-cut from high-grade steel and powder coated black, the same construction as the 3RS frame for the later generation, though the two are not interchangeable because the floor geometry changed between the Mk2 and Mk3.
The seat-side bolt centres sit at 345mm wide, the Sparco fitting equipment width, not the 405mm Recaro pattern. Side mounts go between the subframe and the seat; the type you choose determines your final height. Runners can be added for fore and aft movement if you want them, but most track buyers fix the seat directly. KTR Racing note that some seats may need minor modification to fit depending on size and manufacturer, so it is not a guaranteed straight bolt-in with every brand. Send us your seat details and we will confirm before you order.
The Mk2 Megane RS is now old enough to be a budget track day car, and fitting a proper bucket is usually one of the first changes owners make. The KTR-2RS is the only direct-fit solution for this generation, using the original floor bolt positions with no drilling required.
If your car is the later RS250, RS265 or RS275 built from 2009 onwards, you need the KTR-3RS instead.
Part number KTR-2RS. Priced per subframe; you need one for each side. If you need this by a specific date, drop us an email or click to open a chat to check current availability and lead time before ordering.
