Choosing Aftermarket Sport Seats For Your BMW M140
Seat fitting guide
A customer messaged us on Facebook asking about new seats for their BMW M140i, and it is a question we get often. The M140i is a short, quick, rear wheel drive hatchback that people drive to the circuit and home again, and the standard sports seat gives up once you start pushing or fit a harness.
This guide covers the seats we suggest most for the M140i, from a reclining Recaro to FIA approved buckets, and the three ways to fit them: Planted Technology brackets, PCI Racing sliding sub frames and Cobra's direct fit frames. Between them, almost any seat we sell can go into the car.
- Reclining option: the Recaro Sportster CS, base mount, takes a 4 point harness
- Road buckets: the Recaro Pole Position ABE and the Cobra Nogaro, not FIA
- FIA 8855-1999 buckets: the Sparco Evo QRT range and the OMP WRC-R and ARS-R
- Planted Technology SB139-1 for Recaro seats and recliners
- PCI Racing sliding sub frame for side mount competition buckets
- The factory seats have side airbags: tell us the car's specification

A reclining seat: Recaro Sportster CS
The Sportster CS is Recaro’s road sport seat: a deeply bolstered reclining seat on a steel frame, with an integrated headrest, that tilts forward for the rear seats. It suits a car that does most of its miles on the road and the odd track day. It takes a 4 point harness, it comes with a side airbag version for modern cars that want to keep one, and heating is available. Trims include black Ambla leather, leather with Dinamica suede, and Nardo and Artista cloth.
It is a base mount seat on a 405 mm by 290 mm pattern, and on the M140i it goes on the Planted Technology bracket.
Road buckets: Recaro Pole Position and Cobra Nogaro
Recaro Pole Position ABE. A glass fibre reinforced plastic shell with Recaro's grippy shoulder zones and a lumbar pad for everyday comfort. It carries German ABE road approval, not FIA, so it is for road and track days. It is sized for a 32 to 36 inch waist and drivers under 6ft, and takes a 3 or 4 point belt. There is also an FIA version of the Pole Position if the car will be scrutineered.
It side mounts on Recaro's steel side mounts, and on the M140i it goes on the Planted bracket.

Cobra Nogaro. A one piece fibreglass bucket at 7.9 kg, hand trimmed in the UK and road and track approved. The long backrest suits drivers over 6ft with a 32 to 36 inch waist. The Nogaro Circuit has harness slots and comes in Amalfi leather with Dinamica suede; the Nogaro Club Sport is the same shell with slots, in cloth or velour, for less money; the Street has no slots and is for cars keeping the factory belt. It side mounts on Cobra’s Nogaro side mounts. Our post on the Cobra Nogaro arriving in store has more photos.
-
From £1,039.50 Incl. VATFrom £866.25 Excl. VATPayPal CreditTop 10 productKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £819.00 Incl. VATFrom £682.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £629.00 Incl. VATFrom £524.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
FIA buckets: Sparco Evo QRT and OMP
Sparco Evo QRT. Made with Sparco’s QRT resin process, which keeps the shell light and stiff, and approved to FIA 8855-1999. It comes in three sizes, so it covers most builds: the Evo for a waist up to about 34 inches, the Evo L up to about 36, and the Evo XL around 38. Our guide to which Sparco Evo QRT is right for you goes through them.
OMP WRC-R. A gel coated, perforated fibreglass shell trimmed in OMP’s breathable Airtex, approved to FIA 8855-1999, with high side bolsters and no built in head restraint, which keeps the shell low for headroom. The standard WRC-R suits a 32 to 36 inch waist and drivers under 6ft; the WRC-R XL is larger for a 36 to 42 inch waist.
OMP ARS-R. The wider fit seat in OMP’s fibreglass range, FIA 8855-1999, for a 36 to 38 inch waist and any height. It has mid height bolsters, removable lumbar and leg support, and five harness slots for a 4, 5 or 6 point belt.
The frames that fit them
Planted Technology SB139-1. Planted’s bracket for the M140i, cut from steel with multiple bolt positions, so it takes seats from most major brands, including Sparco, Bride, Cobra, OMP and Corbeau. This is the frame we use for Recaro seats and for reclining seats. Planted carry several brackets across the small BMWs under different part numbers, and which one your car takes depends on the exact model and year, so send us the registration.
PCI Racing sliding sub frame. Our choice for side mount competition buckets such as the Evo QRT, WRC-R and ARS-R. It bolts to BMW’s floor mounting points with no drilling, and PCI’s slider bolts to the base with four bolts instead of two. It is laser cut and formed from one piece of 1/8 inch steel, with 5 and 6 point sub belt mounting points built in. It is handed, so order one for each side.
Cobra direct fit frames. Cobra list frames for the F20 and F21 1 Series for their own seats, which is the tidy route for a Cobra seat.
-
From £224.95 Incl. VATFrom £187.46 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £330.00 Incl. VATFrom £275.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £255.00 Incl. VATFrom £212.50 Excl. VATPayPal CreditKlarna ReadyJust inSelect options This product has multiple variants. The options may be chosen on the product page
Looking for carbon?
We are asked for carbon shells all the time. The ones we would look at for an M140i are the Recaro Pole Position Carbon with ABE, the Cobra Nogaro Circuit Carbon and the OMP HGT Carbon FIA seat. They fit using the same frames as their fibreglass versions. For more on fixed competition seats for this car, see our top fixed competition bucket seats for the BMW M140i.
-
From £2,816.10 Incl. VATFrom £2,346.75 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £2,619.00 Incl. VATFrom £2,182.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Before you choose
Fit comes first. Measure your waist and hips, and if you can get to the showroom, sit in the seats; a shell that looks right on paper can pinch in the hips. Think about how the car is used: a recliner or road bucket for a road car, an FIA seat if it will be scrutineered. And remember the M140i’s factory seats carry side airbags, occupancy sensing and usually powered adjustment. Garreth’s advice is to tell us the car’s specification before ordering, and we will talk through what changes when they come out.
What seat bracket do I need for a BMW M140i?
Planted Technology SB139-1 for Recaro and reclining seats, or a PCI Racing sliding sub frame for side mount buckets.
Can I fit a Recaro Sportster CS to an M140i?
Yes. It is a base mount seat on a 405 mm by 290 mm pattern, and we fit it on the Planted Technology bracket.
Which FIA seats suit the BMW M140i?
We suggest the Sparco Evo QRT range, the OMP WRC-R and the OMP ARS-R, all FIA 8855-1999.
Is the Recaro Pole Position ABE FIA approved?
No. It has German ABE road approval; there is a separate FIA version of the Pole Position.
Do the M140i's standard seats have airbags?
Yes. They have side airbags and occupancy sensing, so tell us the car’s specification before ordering.
💬
Our pickEvo QRT on a PCI slider
An FIA bucket that still slides, for an M140i that is driven to the circuit.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.












