Schroth 3″ Bendable Bolt On Harness End Fitting Kit

Name: Schroth 3" Bendable Bolt On Harness End Fitting Kit
Brand: Schroth Racing
SKU: 01323
Price: 19.00 GBP
Availability: InStock

£22.80 Incl. VAT£19.00 Excl. VAT

Schroth 3″ Bendable Bolt On Harness End Fitting Kit by Schroth Racing. Brand: Schroth Racing. Harness Type: 4-Point, 6-Point. Construction: Steel.

Size/Fitting guide

SKU: 01323 Categories: Schroth Racing Accessories, Racing Harness Pads

Save to Pinterest

Why buy from us

Free UK delivery over £100Calculated at checkout on smaller orders.
Tracking by email and textFrom the moment it leaves us.
Fitting advice since 2003Ask before you buy if you are unsure.
Showroom appointmentsSee the kit in person before you order.

Secure checkout

The Schroth 3-inch Bendable Bolt-on Harness End Fitting Kit, part 01323, does the same job as the straight Bolt-in End Fitting Kit at SSP01324, with one difference: the end plate is bendable. That means you can angle the fitting at the point of installation to suit a mounting point that is not directly in line with the strap’s natural pull direction.

The practical situation where this matters: most harness bar setups present a clean straight-pull for the shoulder strap, and a straight end fitting handles those without issue. In cars where the mounting point is in a chassis location, a roll cage gusset, a body mounting hole or a floor fixing that is slightly off-axis from the strap run, a rigid end fitting forces a small twist or kink into the webbing as it exits the plate. Over time, that twist concentrates wear and load at the kink point. The bendable version lets you set the plate angle to match the pull direction, so the strap exits flat from the fitting in the direction it actually needs to go.

Steel construction. 75mm (3-inch) strap width, compatible with the Schroth Profi, Enduro, Flexi and Clubman harnesses and with the four-point competition harnesses that use the same strap width. Suits both 4-point and 6-point installations.

The kit is for shoulder belt ends. It converts a clip-in strap to a bolt-through attachment. If your harness already has bolt-in ends from the factory, this kit is not needed. If your strap ends are the clip type and you need to convert them to permanent bolt installation because your car has threaded mounting points rather than a harness bar, this is the correct fitting when the angle is tight. For a straightforward bolt-in conversion on a perpendicular mounting, the fixed-plate kit at SSP01324 is a simpler solution and costs slightly less.

Additional information

Brand	Schroth Racing
Harness Type	4-Point, 6-Point
Construction	Steel
Harness Strap Width	75mm

Harness hardware and pad size guide

Everything in this category is sized to one number: the width of your harness straps. Get that right and the rest is straightforward.

2 inch and 50 mm are the same size. So are 3 inch and 75 mmOur harness fittings are labelled in millimetres and our harness pads in inches, so the same strap width looks like two different numbers depending on which page you are on. It is not. Convert once and you can shop across both.

Imperial	Metric	Where you will see it
2 inch	50 mm	The common shoulder and lap strap width
3 inch	75 mm	The wider shoulder strap, and some lap straps

Find your strap width

1Check the harness product pageEvery harness we sell lists its strap width, usually as something like “3 inch shoulder to 2 inch lap”.

2Or measure the webbingLay a strap flat and measure across it. It will be very close to 50 mm or 75 mm.

3Note that shoulder and lap can differA lot of harnesses run 3 inch shoulders with 2 inch laps. If yours does, you need pads to match each.

Of the harnesses we stock, 112 are 2 inch shoulder to 2 inch lap, 38 are 3 inch shoulder to 2 inch lap, 36 are 3 inch to 3 inch and 5 are 2 inch to 3 inch. So mixed widths are common rather than unusual.

Harness pads

Pads slide onto the shoulder straps and stop the webbing digging in over a long stint. They are sold to the strap width, so a 3 inch pad on a 2 inch strap will slide about and a 2 inch pad will not go over a 3 inch strap at all.

If your harness runs 3 inch shoulders, you want 3 inch pads, and the lap strap width does not come into it because pads go on the shoulders.

Eye bolts and fittings

Eye bolts give a clip-in harness something to clip to. They thread into a captive nut in the floor or into a reinforcing plate, and the snap hook on the harness clips through the eye.

Match the fitting to the strap width the same way. A 50 mm fitting suits a 2 inch strap and a 75 mm fitting suits a 3 inch one. If you are fitting a clip-in harness and your car has no suitable threaded points, this is the category you need, and it is worth sorting at the same time as the harness rather than after it.

Check what the mounting point is bolted intoAn eye bolt is only as good as what it threads into. Original seat belt mounting points are engineered for the job. A hole drilled in thin floor pan is not, and wants a spreader plate on the underside. If you are unsure what you are bolting to, send us a photo before you drill anything.

What else you might need

A clip-in harness needs eye bolts or existing threaded points. A bolt-in harness needs threaded points or brackets and no eye bolts at all. A wrap-around harness needs a cage bar in the right place and needs neither. Our harness size and fitting guide covers which installation type is which, and it is worth reading before you order hardware you may not need.

Tell us the harness and we will match the hardwareThe harness make and model, or just its strap widths, and whether it is clip in, bolt in or wrap around. Two minutes on the phone saves ordering the wrong pads twice. Call 0115 989 3488 or email Sales@GSMPerformance.co.uk.

Strap widths read from our own product data across the harness, fitting and pad categories, checked 2 August 2026.

What does the strap width mean for me?
This is a 75mm harness. The shoulder width choice interacts with whether you run a HANS device, and our guide on 3 inch versus 2 inch harnesses explains which to pick and why.

What does it mount to?
A harness needs proper anchor points: a harness bar, cage, or the car’s designed mounting points, plus a seat with the right slots, and as a 4-point/6-point it needs each point anchored correctly. Tell us the car and seat and we will confirm the mounting plan before you order.

Availability

The Rallye and Profi ranges are held in stock

Those go out for immediate dispatch. We bring a batch of Schroth harnesses into the UK once a month, so an order can be allocated onto the next regular delivery.

Vehicle-specific harnesses take longer

Special order Schroth harnesses run to 4 to 6 weeks. The Westfield and Caterham harnesses are made to order and can take longer still, because they are built for that car rather than picked from stock.

If your car is one of those, ask us first. We would rather give you the real timescale than have you waiting on a harness that was never on a shelf.

In-store displays:

We have a premium range of over 125 seats from brands including: Bimarco, Cobra, Corbeau, Sparco, OMP, Recaro, GP-Race, and Bride to name just a few brands we work with.

Alongside this, we also stock and display HANS devices, harnesses, race-wear, race-suits, FIA helmets and various other safety equipment. If you are looking to visit us to see and try any particular seat or product, please contact us in advance and we’ll be happy to help.

In-Store appointments:

Due to the specialist nature of our services, we do ask that you please contact us in advance to book an appointment. We have multiple slots available each day including selected availability at the weekend.

Working by appointment allows us to dedicate our time with you and provide a personal and professional service. We’ll always ensure you leave with the right equipment for your needs.

Spread the cost with Klarna

Choose Klarna at checkout and pick the plan that suits you. The options and amounts for this product are shown below.

Use the purchase power check in the Klarna box for a quick, no-obligation look at what you could be approved for before you order.

How it works at GSM SportSeats4U

1Add the product to your basket and go to checkout as normal.
2Select Klarna as your payment method and choose your plan. Klarna gives you a decision in seconds.
3We dispatch straight away. You pay Klarna on the schedule you chose, and any refund goes back through Klarna.

Your questions, answered by Klarna

Klarna is available to UK residents aged 18 and over. Subject to status. Terms and conditions and late fees apply. Klarna Financial Services UK Limited is authorised and regulated by the Financial Conduct Authority. Full details at klarna.com/uk. Every way you can pay with us is on our payment and finance page, or call 0115 647 8650 and we will talk it through.

Fast delivery lead times:

If you require fast delivery, please contact us in advance of ordering and we’ll happily check stock allocation and availability for you. We carry a large amount of stock at our showroom and across multiple distribution hubs. This allows us to provide immediate dispatch across a huge number of brands from Corbeau and Cobra through to Sparco and OMP. (Does not apply to all items)

Due to the niche market we work in, some products are custom hand made to order, or special order from manufacturers like PCI Racing and Planted Technology. If you want to know how fast a product will be dispatched. Simply drop us a message through our Contact us form.

Addtional lead time notes:

Quick dispatch: Stocked products are dispatched within 24-48 hours with Parcel Force.
Sparco roll cages: We can only deliver these to a registered (LTD) company address.
In-store collection: Please contact us in advance to book an in-store collection appointment.