JP Mini Roll Cages Updated For 2024
Roll cage news, December 2023
Our whole range of JP Cages roll cages for the BMW Mini has been updated ready for 2024. Every cage now has up to date information on its approval, its specification and the model it is built for, with more colour and configuration options to choose from.
The Mini range runs from budget half cages for track days, through DIY kits for anyone who can weld, up to multipoint competition cages built to Motorsport UK rules and an FIA approved weld-in kit for the R56.
- Our JP Cages Mini roll cages updated ready for 2024
- Half cages for the R50/R53, R55 and R56, for track day use
- DIY half cage kits for builders with welding skills
- Multipoint cages in design options from JPC1.5 to JPC5
- An FIA approved DIY weld-in cage kit for the R56
- CDS or T45 tube and a range of colours on many cages

What is on this page
What has changed on the Mini cages
Each JP Mini cage listing has been checked and rewritten. The listings now set out the approval of each cage, the tube it is made from, the fitting method and the exact Mini it suits, and there are more colours and design options to pick from.
The images on the JP listings show cages fitted in cars so you can see how they sit. What you receive is the unfitted cage or kit.
Half cages and DIY kits
The JP half cages for the R50/R53, R55 and R56 use X bracing with harness bars and gussets, and they follow the Motorsport UK Blue Book specification. They do not use door bars and are made for track days, not competition, where they add a lot more protection in a roll than no cage at all.
For the R50/R53 and R56, stripped and unstripped fitment uses mounts that are welded in, and some trim may need cutting, with a non weld mounting option for unstripped cars. CDS or T45 tube and sunroof versions are listed.

The DIY half cage kits are the budget route. They come with all the tubes, gussets and mounting plates, plus positioning markers and an instruction sheet, and they are designed for anyone with welding and fabrication skills. Garreth’s advice is to be honest about your welding before choosing a DIY kit, and to ask us if you are unsure.
-
From £635.10 Incl. VATFrom £529.25 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £635.10 Incl. VATFrom £529.25 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £553.20 Incl. VATFrom £461.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £354.74 Incl. VATFrom £295.62 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Multipoint and FIA cages for competition
For racing, the multipoint cages are built to Motorsport UK rules. The R50/R53 bolt-in multipoint cage and the R56 weld-in multipoint kit come in design options from JPC1.5, with single door bars and a diagonal rear, up to JPC5, with double door bars, X rear, harness bars, A pillar supports and an X in the roof. The R56 Dash Dodger multipoint is a bolt-in cage for track days, not for competition.
At the top is the R56 DIY weld-in FIA cage kit, JPC7, in BS4 T45. Our guide to bolt-in and weld-in cages explains the difference, and the full JP roll cage range covers Audi, BMW and more.
-
From £899.58 Incl. VATFrom £749.65 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £860.06 Incl. VATFrom £716.72 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £873.18 Incl. VATFrom £727.65 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Can the JP Mini half cages be used in competition?
No. They are made for track days and follow the Blue Book specification, but they are not for competitive use.
Do the JP Mini half cages need welding?
The stripped and unstripped fitments use weld-in mounts, and a non weld mounting option is listed for unstripped cars.
Which Minis does the JP range cover?
Our updated range covers the R50/R53, R55 and R56.
Is there an FIA approved JP cage for the Mini?
Yes. The R56 DIY weld-in FIA cage kit, JPC7.
💬
Ready for 2024JP cages for the Mini
From track day half cages to FIA weld-in kits for the R50/R53, R55 and R56.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.






