The LUKE Professional 4 Point Harness, part code HP011, sits above the GHR range in the Luke lineup. The main step up is the choice of strap width: 50mm or 75mm. The 50mm is lighter and slightly easier to route through narrow harness bars. The 75mm spreads the crash load over a wider area of shoulder and is the better choice for anything beyond occasional track days.
Road and Track approved, not FIA homologated. The Professional range is not HANS-specific, so it runs without a collar device on road-legal kit cars and track-day cars where FIA rules do not apply. If your competition regulations require FIA or HANS, see the Corbeau Ultima Pro range.
Luke has been making harnesses in Sussex as Corbeau’s motorsport division since 1975, using straight-stitch sewing only. The red release handle is a Luke constant across the range: a single red pull that emergency crews and marshals know on sight. All harnesses carry a serial code for production tracing.
HP011 is available in ten colours, same palette as the rest of the Professional range. Colour is chosen from the variation options above. If you want 75mm pads to match, Luke’s 3-inch harness pads and jumbo shoulder pads (JSP75) both fit 75mm webbing.
The 4-point layout is the most common choice for road and track use where no regulation specifies otherwise. If your class requires a sub-strap or a six-point layout, the HP024 (five-point) and HP034 (six-point) sit at £140 and £145 respectively in the same range. Choose webbing width and colour above. If your preferred colour needs ordering in, we will confirm the lead time.
