Sparco Head Support Motorsport Seats
Showroom news, August 2022
The Sparco Circuit, Circuit II and Pro ADV are three Sparco seats with head support, and all three are on display in our showroom. They are fibreglass, FIA approved seats, and each one has a different shape to suit a different build of driver.
To show how they fit, we sat a 5ft 10in driver with a 32 inch waist in them, wearing full racewear and a helmet, so you can see how the head support works with a helmet on. Here is how the three compare.
- Three Sparco seats with head support: Circuit, Circuit II and Pro ADV
- All three are fibreglass QRT seats, approved to FIA 8855-1999
- The Circuit suits a 28 to 32 inch waist
- The Circuit II suits a 32 to 40 inch waist
- The Pro ADV has Sparco's DCT built in head restraint and suits taller drivers
- All three are on display in our showroom to try

What is on this page
Which one suits your build?
All three seats wrap a head support around the helmet, which helps hold the head in a side impact. The difference is the size of the shell. The Circuit is the narrow one, cut for drivers with a 28 to 32 inch waist. The Circuit II has the same construction and approval in a wider shell, for waists from 32 to 40 inches.
The Pro ADV is the tall one. It is one of the few FIA seats at this level that suits drivers over 6ft, so it is the one to look at if other head support seats sit too low around your helmet. All three are side mounted, HANS friendly and take a 6 point harness.
When we fit someone to a seat like this, we look for two things. The shoulders should sit against the shoulder supports, with the harness slots at the right height behind them, and the helmet should sit inside the head support, not above it.
That is why we tested with a helmet on. A seat that feels fine in a T shirt can feel very different once a helmet is inside the wings. Garreth's advice is to try a head support seat in your own helmet if you can.

What QRT means
QRT is the process Sparco use to make their fibreglass shells. Sparco redesigned the Circuit in 2020 around it, and they say the QRT process makes the shells noticeably lighter than their fibreglass seats made the traditional way, without giving up strength. The Pro ADV has been updated with QRT as well.
The Pro ADV also carries DCT, Sparco’s built in head restraint structure, designed to reduce head movement in an impact, along with self extinguishing fabric and non slip fabric at the shoulders and the seat.
The rest of the Sparco QRT range
The head support seats are part of a bigger Sparco QRT range, and we have one of the largest Sparco seat displays around. There are smaller QRT seats for tight cockpits and slimmer drivers, and the wider range runs from seats such as the Evo QRT, Pro 2000 QRT and Rev QRT to the steel framed Sprint for drivers starting out in motorsport, and carbon seats for the top level.
Many of the seats we have on display are ready to dispatch or collect. Our comparison of carbon head restraint FIA seats and our guide to how long FIA harnesses last are useful next reads if you are building a competition car.
Are the Sparco Circuit, Circuit II and Pro ADV FIA approved?
Yes. All three are approved to FIA 8855-1999.
What is the difference between the Circuit and the Circuit II?
The shell width. The Circuit suits a 28 to 32 inch waist and the Circuit II a 32 to 40 inch waist.
Which Sparco head support seat suits a tall driver?
The Pro ADV, which suits drivers over 6ft.
What is DCT on the Pro ADV?
It is Sparco’s built in head restraint structure, designed to reduce head movement in an impact.
Can I try these seats before buying?
Yes. All three are on display in our showroom.
💬
Three shapesSparco head support seats
Narrow, wide and tall, all FIA approved and all in the showroom to try.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.


