Sabelt Titan Carbon Large FIA Seat Showcase
Seat showcase, August 2022
A pair of Sabelt Titan Carbon Large FIA bucket seats has just come into the showroom, ready to go out to a customer. Before they left, we took the chance to sit in them and take a proper look.
The Titan Carbon is the carbon fibre version of the standard Sabelt Titan. It is lighter than the fibreglass seat, and the bare carbon back shell shows off the weave.
- A pair of Sabelt Titan Carbon Large seats, in for a customer
- Carbon fibre shell, lighter than the standard Titan
- Black velour trim with 3D spacer fabric and a red centre stripe
- Fixed back, FIA approved, five harness slots
- HANS compatible and side mounted
- Titan Large and X-Large seats on display in the showroom

The seats that came in
These Titans are trimmed in black, with velour across most of the seat and 3D spacer fabric down the back for extra padding. A red line runs down the centre, which is a small detail but it lifts the whole seat. On the shoulder areas Sabelt use a tougher, grippier material. It helps hold the driver in place against sideways movement, and because it wears well it sits exactly where the seat takes the most contact.
The Titan is a fixed back bucket seat with high sides that support the thighs, giving good lateral hold. It is FIA approved, so it suits events that need an FIA seat as well as track days that do not.
The carbon version is the one to look at from behind. The back shell is left as bare carbon fibre, so the weave is on show, and the shell is lighter than the fibreglass Titan.
Sitting in them in the showroom, we were impressed by the build quality and by how much support they give. The back is fairly large, which makes the Large a good choice for taller drivers.

Harnesses and fitting
The Titan has five harness slots, so it works with anything from a 3 point up to a 6 point harness, and it is HANS compatible, which suits track day and competition use.
It is a side mounted seat, so it goes into the car on a pair of side mounts and a subframe or runners to suit the car. Side mount spacing matters, so tell us the seat and the car and we will match the brackets to them. Garreth’s advice with any seat this size is to sit in it first if you can, or send us your height and waist.
Our Sabelt Titan and Taurus seats
The Titan comes in a few versions, with different sizes and shell materials. We have a pair of Titan Large and X-Large seats on our display, ready to try in the showroom, and they can be dispatched or collected.
The Sabelt Taurus is the other seat worth a look alongside the Titan. Sabelt have been making seats and harnesses for more than thirty years, and their range covers everything from club racing to international competition. Our guide to FIA 8855-1999 and 8855-2021 seats explains the two seat standards.
What is the Sabelt Titan Carbon?
It is the carbon fibre version of the Sabelt Titan FIA bucket seat, lighter than the fibreglass seat and with a bare carbon back shell.
Who does the Titan Large suit?
It has a fairly large back, so it suits taller drivers; send us your height and waist to check the size.
How many harness slots does the Titan have?
Five, so it works with 3 point up to 6 point harnesses, and it is HANS compatible.
Can I try a Titan before I buy?
In August 2022 we had Titan Large and X-Large seats on display in our showroom to try.
💬
For taller driversThe Titan Carbon Large
A lighter, carbon shelled Titan with a large back and plenty of support.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




