Driver Profile: OMP TRS-X With A 5ft 10Inch Driver
Seat fitting, August 2022
Photos of an empty seat only tell you so much. To show how the OMP TRS-X fits a real person, we sat a 5ft 10in driver in one, wearing full racewear, and photographed it from a few angles.
Wearing a race suit and a helmet makes a real difference to how a seat fits, so this is closer to what you would feel on a track day or at an event than sitting in it in jeans.
- Driver height: 5ft 10in, in full racewear and helmet
- The OMP TRS-X is a steel framed FIA 8855-1999 seat
- Medium height bolsters for good lateral support
- The thigh support cushion is removable
- It can be side mounted or base mounted
- Available in black, or black with fluorescent yellow

What is on this page
How the TRS-X fits our driver
Our driver fits the TRS-X well. His shoulders rest against the shoulder supports, and there is plenty of room for the harness shoulder straps to reach the slots in the back of the seat at the right height.
That shoulder position is one of the first things we check when someone tries a seat. If the shoulders sit above the supports, the seat cannot hold the upper body properly; if they sit well below, the belts end up pulling down on the shoulders.
The other thing we look at is the head. At 5ft 10in, our driver's head is supported by the top of the seat, so the TRS-X is the right height for him. A much taller driver would find the top of the seat sitting lower down the back of the helmet.
These are the same checks we would make if you came in to try one, and they are why we always ask for height as well as waist size.

About the OMP TRS-X
The TRS-X is a steel framed clubman competition seat, homologated to FIA 8855-1999, and it sits a step above OMP’s TRS-E. It has a more aggressive shell shape and larger harness slots, which helps both taller and smaller drivers get the belts in the right place. It takes a 4 or 6 point harness and works with a head and neck restraint.
The outside of the seat is narrow, but it keeps a reasonable width inside for a broader driver, so it suits narrower cars as well as average sized ones. The bolsters are medium height, the thigh support cushion is removable, and it can be side mounted or base mounted. It comes in plain black or black with fluorescent yellow, which is the version in our photos.
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The rest of the OMP TRS range
The seats in OMP’s TRS family are all very similar in size and shape. The differences are mainly the trims, from classic vinyl to waterproof materials. The TRS-E has a slightly different head support shape from the TRS-X and is shorter, which makes it better suited to drivers under 6ft, and it is an excellent entry level competition seat.
We have always found the OMP FIA seats popular, and the TRS-X was a good addition to the range. Garreth’s advice is to send us your height and waist if you cannot try one in person. Our guide to FIA 8855-1999 and 8855-2021 seats explains the approval.
Does the OMP TRS-X fit a 5ft 10in driver?
It fitted our 5ft 10in driver well, with his shoulders against the supports and his head supported by the top of the seat.
Is the OMP TRS-X FIA approved?
Yes. It is homologated to FIA 8855-1999.
Can the OMP TRS-X be base mounted?
Yes. It can be side mounted or base mounted.
What is the difference between the OMP TRS-X and TRS-E?
The TRS-E has a different head support shape and is shorter, so it suits drivers under 6ft, while the TRS-X has a more aggressive shell and larger harness slots.
💬
Tested in the showroomThe OMP TRS-X
A steel framed FIA seat that fitted our 5ft 10in driver well.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.



